Test Buttons: FAILED about chameleonmini HOT 7 CLOSED

Have you tried the advice it gives you at the very end (flashing the production firmware)? Do buttons work then?

from chameleonmini.

@testtest666 Please tell us what exactly you did. You received your Chameleon and then plugged it in and typed showlog and received this test log? Or did you type reset and rebooted the Chameleon in between?

from chameleonmini.

the test firmware expects you to place a card on the antenna, then press both buttons, and then all tests will pass. however, you don't need the test firmware any more (that was for the factory) so please follow the getting started to program the current firmware.

from chameleonmini.

Thank you all。

I have updated the firmware to
Version?
Based on the open-source NFC tool ChameleonMini. Https://github.com/emsec/ChameleonMini commit 2005f46

But I have not tested, I do not know if there are any problems.

Where can I download test firmware version 0.5 (has been compiled)?
I would like to test again. Thank you.

from chameleonmini.

There is no possibility to download it. The test firmware was designed so the factory can check whether there are problems with some of the components. You are not supposed to use the test firmware for testing, it was just for the factory.

If you received your Chameleon and after powering it, only the green LED turned on, everything is fine and you can enjoy your Chameleon. If you do not remember, just try to use the Chameleon as a reader (config=iso14443a_reader) and try to use the buttons (type rbutton=? for help).

from chameleonmini.

in my impression：
The first time you use Tera Term to connect to Chameleon-mini, all tests are OK.
Once, I test firmware version 0.5,
executed the “upgrade” command, nothing has been done. Because there are other things, I left.
come back, I restart the Chameleon-mini. There Test Buttons: FAILED.

from chameleonmini.

Ok, then everything is fine. I also noticed, that the test report you gave us in your first post states "Generating Test Report from SRAM". If this would have been the factory test, it would have been generated from FRAM. So what happened is that you restarted the test (I don't know how) and left it alone. Thus, the button test and the reader test failed.

Enjoy your Chameleon!

from chameleonmini.