Comments (7)
Same issue since Kernel 4.7 to 4.8.8-1-ARCH, same displayLink version (latest), using monitor DELL U2417H.
[ 2120.820123] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff88045758bc00 tries to close us
[ 2120.820124] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2121.243097] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff8804a9153200 tries to close us
[ 2121.243101] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2121.243114] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff8804a9151e00 tries to close us
[ 2121.243117] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2414.942140] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff880457588c00 tries to close us
[ 2414.942141] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2414.942146] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff880457588c00 tries to close us
[ 2414.942147] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2414.942151] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff880457588c00 tries to close us
[ 2414.942152] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 2517.229590] evdi: [D] add_store:195 Increasing device count to 4
[ 2517.229991] evdi: [D] evdi_crtc_init:312 drm_crtc_init: 0
[ 2517.231316] evdi: [W] evdi_painter_crtc_state_notify:377 Painter does not exist!
[ 2517.231321] evdi: [D] evdi_detect:72 Painter is disconnected
[ 2517.231327] evdi evdi.3: No connectors reported connected with modes
[ 2517.231331] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2517.233170] evdi evdi.3: fb4: evdidrmfb frame buffer device
[ 2517.233173] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2517.233174] [drm] No driver support for vblank timestamp query.
[ 2517.233176] [drm] evdi: evdi_stats_init
[ 2517.233184] [drm] Initialized evdi 1.2.64 20161003 on minor 4
[ 2518.581999] evdi: [W] evdi_painter_disconnect:478 (dev=0) An unknown connection to ffff88043cee7a00 tries to close us
[ 2518.582000] evdi: [W] evdi_painter_disconnect:479 - ignoring
The crash produce this log in xorg:
[ 2517.295] (EE)
[ 2517.295] (EE) Backtrace:
[ 2517.295] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139) [0x59cd49]
[ 2517.296] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad851130af]
[ 2517.297] (EE) 2: /usr/lib/libgbm.so.1 (gbm_surface_has_free_buffers+0x1505) [0x7fad770978f5]
[ 2517.297] (EE) 3: /usr/lib/libgbm.so.1 (gbm_surface_has_free_buffers+0x1b98) [0x7fad77098628]
[ 2517.297] (EE) 4: /usr/lib/libgbm.so.1 (gbm_surface_has_free_buffers+0x1498) [0x7fad77097738]
[ 2517.297] (EE) 5: /usr/lib/libgbm.so.1 (gbm_create_device+0x4c) [0x7fad77094cbc]
[ 2517.298] (EE) 6: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x81) [0x7fad7847b151]
[ 2517.298] (EE) 7: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x3cc0) [0x7fad78c78af0]
[ 2517.298] (EE) 8: /usr/lib/xorg-server/Xorg (xf86PlatformMatchDriver+0x706) [0x4972d6]
[ 2517.299] (EE) 9: /usr/lib/xorg-server/Xorg (xf86PlatformDeviceCheckBusID+0x201) [0x49cae1]
[ 2517.299] (EE) 10: /usr/lib/xorg-server/Xorg (config_fini+0xa17) [0x4991e7]
[ 2517.299] (EE) 11: /usr/lib/xorg-server/Xorg (config_fini+0x13e8) [0x49a658]
[ 2517.300] (EE) 12: /usr/lib/xorg-server/Xorg (WakeupHandler+0x6d) [0x43b2dd]
[ 2517.300] (EE) 13: /usr/lib/xorg-server/Xorg (WaitForSomething+0x1e9) [0x5954f9]
[ 2517.300] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x10e) [0x4365ee]
[ 2517.301] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x463) [0x43a7f3]
[ 2517.302] (EE) 16: /usr/lib/libc.so.6 (__libc_start_main+0xf1) [0x7fad85100291]
[ 2517.302] (EE) 17: /usr/lib/xorg-server/Xorg (_start+0x29) [0x4246e9]
[ 2517.303] (EE) 18: ? (?+0x29) [0x29]
[ 2517.303] (EE)
[ 2517.303] (EE) Segmentation fault at address 0xc
from evdi.
@martindube Could you raise the crash with Xorg? It does not seem to be related with the problem OP raised.
from evdi.
Same problem for me
Kernel: 4.8.10-1-ARCH
DisplayLink model: D3100
Monitor: Philips 246V5L
dmesg:
[ 421.727066] usb 1-2: USB disconnect, device number 3
[ 421.727068] usb 1-2.2: USB disconnect, device number 4
[ 421.727069] usb 1-2.2.3: USB disconnect, device number 5
[ 421.800242] usb 2-2: USB disconnect, device number 2
[ 421.800245] usb 2-2.1: USB disconnect, device number 5
[ 421.800673] usb 2-2.2: USB disconnect, device number 3
[ 421.801074] usb 2-2.3: USB disconnect, device number 4
[ 421.801794] cdc_ncm 2-2.3:1.5 enp0s20u2u3i5: unregister 'cdc_ncm' usb-0000:00:14.0-2.3, CDC NCM
[ 422.329769] evdi: [D] evdi_painter_disconnect:499 (dev=1) Disconnected from ffff88024aa15200
[ 422.329771] evdi: [D] evdi_detect:72 Painter is disconnected
[ 422.329810] evdi: [W] evdi_painter_disconnect:478 (dev=-1) An unknown connection to ffff88024aa15200 tries to close us
[ 422.329811] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 422.330436] evdi: [D] evdi_detect:72 Painter is disconnected
[ 422.967070] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 423.223185] hub 2-2:1.0: USB hub found
[ 423.223295] hub 2-2:1.0: 4 ports detected
[ 423.386840] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[ 423.522516] hub 1-2:1.0: USB hub found
[ 423.522674] hub 1-2:1.0: 4 ports detected
[ 423.603658] usb 2-2.2: new SuperSpeed USB device number 7 using xhci_hcd
[ 423.860279] hub 2-2.2:1.0: USB hub found
[ 423.860474] hub 2-2.2:1.0: 4 ports detected
[ 423.940230] usb 1-2.2: new high-speed USB device number 7 using xhci_hcd
[ 424.050628] hub 1-2.2:1.0: USB hub found
[ 424.051622] hub 1-2.2:1.0: 4 ports detected
[ 424.116975] usb 2-2.1: new SuperSpeed USB device number 8 using xhci_hcd
[ 424.340277] usb 2-2.3: new SuperSpeed USB device number 9 using xhci_hcd
[ 424.368082] usb 2-2.3: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[ 424.368086] usb 2-2.3: [16] FU [Dell USB Audio Playback Volume] ch = 6, val = -8176/0/16
[ 424.368591] usb 2-2.3: Warning! Unlikely big volume range (=767), cval->res is probably wrong.
[ 424.368594] usb 2-2.3: [13] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16
[ 424.387886] cdc_ncm 2-2.3:1.5: MAC-Address: 9c:eb:e8:31:f1:b8
[ 424.387891] cdc_ncm 2-2.3:1.5: setting rx_max = 16384
[ 424.388052] cdc_ncm 2-2.3:1.5: setting tx_max = 16384
[ 424.388599] cdc_ncm 2-2.3:1.5 usb0: register 'cdc_ncm' at usb-0000:00:14.0-2.3, CDC NCM, 9c:eb:e8:31:f1:b8
[ 424.430499] cdc_ncm 2-2.3:1.5 enp0s20u2u3i5: renamed from usb0
[ 424.460771] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2u3i5: link is not ready
[ 424.460865] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2u3i5: link is not ready
[ 424.476777] evdi: [W] evdi_painter_disconnect:478 (dev=-1) An unknown connection to ffff8802237f3400 tries to close us
[ 424.476780] evdi: [W] evdi_painter_disconnect:479 - ignoring
[ 424.490146] usb 1-2.2.3: new low-speed USB device number 8 using xhci_hcd
[ 424.650964] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/0003:045E:076C.0002/input/input18
[ 424.706998] microsoft 0003:045E:076C.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:14.0-2.2.3/input0
[ 425.836995] evdi: [D] evdi_painter_connect:448 (dev=-1) Connected with (null)
[ 425.836997] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 425.837030] evdi: [D] evdi_painter_crtc_state_notify:374 (dev=1) Notifying crtc state: 3
[ 425.837938] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 425.837942] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 427.476942] cdc_ncm 2-2.3:1.5 enp0s20u2u3i5: network connection: disconnected
[ 432.564890] cdc_ncm 2-2.3:1.5 enp0s20u2u3i5: 1000 mbit/s downlink 1000 mbit/s uplink
[ 432.580884] cdc_ncm 2-2.3:1.5 enp0s20u2u3i5: network connection: connected
[ 432.580904] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u2u3i5: link becomes ready
from evdi.
My docking station (D3100) started working this morning after an upgrade to 4.8.8-2-ARCH. A modprobe udl
and sudo systemctl restart displaylink.service
didn't crash X this time. However, there are still many evdi errors in dmesg.
from evdi.
Thanks @martindube , it worked also for me.
from evdi.
OK, looks like it's now working in Arch, so closing.
from evdi.
I have similar problem on Ubuntu 18.04. It also slows boot time for about 1 min. Also I found out that even on Windows 10 usb ports aren't working. So this is probably hardware error. Is it possible to somehow disable/blacklist/ignore this usb ports?
$ dmesg | grep "usb 1-1"
[ 100.975144] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[ 106.199059] usb 1-1: device descriptor read/64, error -110
[ 121.818762] usb 1-1: device descriptor read/64, error -110
[ 122.438635] usb 1-1: new full-speed USB device number 6 using xhci_hcd
[ 127.702841] usb 1-1: device descriptor read/64, error -110
[ 143.318646] usb 1-1: device descriptor read/64, error -110
[ 144.082454] usb 1-1: new full-speed USB device number 7 using xhci_hcd
[ 154.917538] usb 1-1: device not accepting address 7, error -62
[ 155.045363] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[ 165.662956] usb 1-1: device not accepting address 8, error -62
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04.1 LTS
Release: 18.04
Codename: bionic
$ uname -r
4.15.0-38-generic
from evdi.
Related Issues (20)
- Display artifacts/corruption on Fedora 39 HOT 7
- Feature request: Add a demo for Using the library HOT 2
- 6.8.7.arch1 kernel doesn't work - downgrading to 6.8.4.arch1 works HOT 14
- SteamOS suddenly not recognizing displays HOT 1
- 6.9.1 kernel doesn't work - downgrading to 6.8.9-arch1-2 works HOT 3
- Evdi 1.14.4 cannot compile on kernel 6.10.0-0.rc1 HOT 1
- GDM and GNOME crash and return to login screen in Arch HOT 10
- Evdi 1.14.4 works well on 6.9.3 and 6.8.9, but not on 6.8.10 ;) HOT 2
- 1.14.4 Can't be installted on RHEL 8.10 becuase Glibc HOT 1
- No screen show on rockchip rk3588 evb7(GPU mali g610) board
- No output for TTY consoles/terminals
- Cannot be compiled on Fedora 40
- Module not building if CONFIG_DRM_EVDI is missing
- Module evdi not found, 6.6.41-1-lts HOT 2
- Linux 6.10.X Lenovo ideapad 3 Cannot find any crtc or sizes HOT 1
- evdi drm Cannot find any crtc or sizes
- 6.10.3: .remove = evdi_platform_device_remove HOT 7
- SSL Error while installing evdi
- Monitors connected through the dock are blank on Wayland but work fine on X11 (Ubuntu 24.04) HOT 2
- Module evdi not found in directory /lib/modules/6.10.3-arch1-2 HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from evdi.