RC2 session charged kWh not displayed about smartevse-3.5 HOT 8 CLOSED

@rvdgaag Was this in Smart mode or in Solar mode?

from smartevse-3.5.

from smartevse-3.5.

Now I also have those "resets" to zero (like @djoenez):

...but they happen exactly when I start charging:

...so that is intended behaviour.

What state changes can you see that cause a reset? I'm afraid my test rig only shows this kind of behaviour when I am at state B1, which should then be reset to B by the EV... which turns back to normal behaviour.

EDIT: light blue = charging in the lower graph.

from smartevse-3.5.

@rvdgaag : You are sure you were charging on the Master, and snapshot and config are all from Master device?

So we are not talking about the Node / Slave device ?

from smartevse-3.5.

from smartevse-3.5.

Well both my fellow dev and I cannot reproduce, nor explain it (going through the code), perhaps djoenez can give us some pointers on his observations / logs...

from smartevse-3.5.

yesterdays and last nights charging sessions were ok, the reporting was not reset again. So let's consider this a hickup.

from smartevse-3.5.

Dove into the reset. i see the smartevse becomes unavailable (so a reboot?). after that it started charging again. I agree with rvdgaag. let's see it as a hickup, and ill monitor if it happens more often and open a new issue if that is the case.

from smartevse-3.5.