EV goes to sleep while EVSE is making current available about smartevse-3.5 HOT 9 CLOSED

Ok that's funny I just fixed that bug, see #24 , bottom of the discussion the "1eeb20ba03+1.zip" should fix it...

from smartevse-3.5.

New version with bug fixes, please test:
827a3cf8b23.zip

from smartevse-3.5.

Bug reported by "maarten_NL" through PB: Contactor is on, EVSE says charging while car does not charge.

0796d9f2b5.zip

This version might solve your problem, please test!

With this version, this is the part of the log after a Max mains was exceeded for a very short period of time. Then after one minute, the EVSE tried to re-initiate the charging session but after activating the contactor, screen went blank, contactor switched off,

(I) (printStatus)(C0) STATE: B1 Error: 0 StartCurrent: -8 ChargeDelay: 3 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 6.5 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.4 A L2: 6.5 A L3: 5.0 A Isum: 15.9 A
(I) (printStatus)(C1) STATE: B1 Error: 0 StartCurrent: -8 ChargeDelay: 2 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 6.5 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 6.5 A L3: 5.1 A Isum: 16.0 A
(I) (printStatus)(C0) STATE: B1 Error: 0 StartCurrent: -8 ChargeDelay: 1 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 6.5 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.4 A L2: 6.5 A L3: 5.1 A Isum: 16.0 A
(I) (printStatus)(C1) STATE: B1 Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 5.1 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.3 A L3: 5.1 A Isum: 13.8 A
(ProximityPin)(C0) PP pin: 1023 (1921 mV) (warning: fixed cable configured so PP probably disconnected, making this reading void)
(I) (EVSEStates)(C0) Cable limit: 17A Max: 17A
(D) (IsCurrentAvailable)(C0) Current available checkpoint D. ActiveEVSE increased by one=1, TotalCurrent=0.0A, StartCurrent=8A, Isum=13.8A, ImportCurrent=0A.
(setState)(C0) 18:47:50 STATE B1 -> B
(EVSEStates)(C0) Diode OK
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 5.1 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.2 A L3: 5.1 A Isum: 13.7 A
(I) (printStatus)(C0) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 5.1 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.4 A L2: 4.2 A L3: 5.1 A Isum: 13.7 A
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.9 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.2 A L3: 4.9 A Isum: 13.5 A
(D) (IsCurrentAvailable)(C0) Current available checkpoint D. ActiveEVSE increased by one=1, TotalCurrent=0.0A, StartCurrent=8A, Isum=13.5A, ImportCurrent=0A.
(setState)(C0) 18:47:52 STATE B -> C
(I) (printStatus)(C1) STATE: C Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.8 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.2 A L3: 4.8 A Isum: 13.4 A
(I) (printStatus)(C0) STATE: C Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.8 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.4 A L2: 4.2 A L3: 4.8 A Isum: 13.4 A
(setState)(C0) 18:47:53 STATE C -> B
(EVSEStates)(C0) Diode OK
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.7 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.2 A L3: 4.7 A Isum: 13.3 A
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.7 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.2 A L3: 4.7 A Isum: 13.3 A
(I) (printStatus)(C0) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.7 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.4 A L2: 4.2 A L3: 4.7 A Isum: 13.3 A
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.7 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.4 A L2: 4.1 A L3: 4.7 A Isum: 13.2 A
(I) (printStatus)(C1) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.6 A IsetBalanced: 17.0 A
(I) (printStatus)(C1) L1: 4.3 A L2: 4.0 A L3: 4.6 A Isum: 12.9 A
(I) (printStatus)(C0) STATE: B Error: 0 StartCurrent: -8 ChargeDelay: 0 SolarStopTimer: 0 NoCurrent: 0 Imeasured: 4.6 A IsetBalanced: 17.0 A
(I) (printStatus)(C0) L1: 4.3 A L2: 4.0 A L3: 4.6 A Isum: 12.9 A

from smartevse-3.5.

Flashed that version, triggered the symptom by exceeding max mains and the same behavior occurs.

Kona stops the charging, after 60 seconds the EVSE tries to restart the charing, state C but after the contactor close, it reopens again. see line 619 and further of the telnet log:

log.txt

from smartevse-3.5.

I can't see anything strange in those logs; I understand v3.0.1 worked, the easiest way to find this problem is to move through history and narrow it down to the commit that introduced the problem.
So first flash v1.8.0 , if it works then, goto v3.5.0-RC0, but if it doesn't, go back to v1.6.0 or even v1.4.4 ; that's the nice thing about this repo, you can go all the way back to the first commit, which is Stegen's v3.0.1 .

The binaries of v1.8.0 and earlier you can pull off the serkri repo, but it is pretty simple to compile yourself:
https://github.com/dingo35/SmartEVSE-3.5/blob/master/docs/configuration.md see bottom of page.

If you can find the disturbing commit I'm happy to work around it. The alternative is that you park your Kona at my house for a few weeks :-) .

from smartevse-3.5.

@mintgroen Could you please test if this version still has problems with the Kona?

de779d4d4.zip

from smartevse-3.5.

Sure will do, the sun was shining so the Kona is full atm. I'll test asap.

from smartevse-3.5.

Did some testing and the Kona seems to listen to the EVSE and restarts charging when the power availability returns.

from smartevse-3.5.

Thanks!

from smartevse-3.5.