Please follow the install command from the readme file:

curl -kL dexterindustries.com/update_grovepi | bash

It pulls it more than one repo.

from grovepi.

Solved!

So these are the steps, I followed on the Raspberry Pi 3B+ with Raspbian Buster.

In the terminal, I ran the following commands:

git clone https://github.com/DexterInd/GrovePi

curl -kL dexterindustries.com/update_grovepi | bash

cd /home/pi/Dexter/GrovePi/Firmware
bash firmware_update.sh

I didn't have to do any of the previous installation steps as mentioned in the above comment.

from grovepi.

hey Guys, I have the same issue, but the solution that worked for Jonathan did not work for me. I did get a few steps further than before, but now I am stuck here:

I typed in :
pi@raspberrypi:~/dexter/GrovePi/Firmware $ bash firmware_update.sh

Terminal said:
Updating the GrovePi firmware

http://www.dexterindustries.com/grovepi
Run this program:
sudo ./firmware_update.sh

=============================
Do you want to update the firmware? [y,n]y
Make sure that GrovePi is connected to Raspberry Pi
Firmware found
Press any key to start firmware update
. . .
/home/pi/dexter/GrovePi/Firmware/grovepi_firmware_update.sh: line 3: avrdude: command not found
/home/pi/dexter/GrovePi/Firmware/grovepi_firmware_update.sh: line 4: avrdude: command not found
/home/pi/dexter/GrovePi/Firmware/grovepi_firmware_update.sh: line 5: avrdude: command not found
/home/pi/dexter/GrovePi/Firmware/grovepi_firmware_update.sh: line 6: avrdude: command not found

from grovepi.

I tried to reinstall Grove Pi on a fresh install of Raspbian and I came across a similar issue as shown in #477

from grovepi.