Pro Controller doesn't work after starting the program about betterjoy HOT 9 CLOSED

I have the same problem with you. I use cemu 1.13 and I don't know the version of the author's cemu. Maybe the version is too old? @Davidobot

from betterjoy.

Now I find that if I start the BetterJoyForCemu.exe, the controller won't work anymore on any app. After starting the BetterJoyForCemu.exe and pressing "enter" to exit, I test my controller by "Game Controller Tester", and it shows that there's no input when I press the buttons of the controller. The controller is still connected. Is there any problems in BetterJoyForCemu.exe?

from betterjoy.

@juFaaa1508 The Pro Controller isn't meant to be recognised in the Windows game controller settings - the program makes the controller exclusively available for Cemu.

Once you have started BetterJoyForCemu, leave it on and run Cemu (making sure to have an input profile and having "Also use for axis/buttons" ticked) and you should be good to go - the buttons are non-rebindable at the moment.

@VitalyAnkh It should work with any Cemu version that supports the gyro CemuHook. See above comment.

from betterjoy.

@Davidobot Thanks for that information. After trying several times, I think I've found the solution.
When opening BetterJoyForCemu normally, it doesn't work for me. But if I open the program as an administrator, it works perfectly.
Thanks for creating such a cool program!
Maybe you should write "opening as an administrator" as a solution in the problems section of your readme?

from betterjoy.

Thanks for the feedback and glad to hear that you got it working!

I'll add that as a solution - many thanks.

from betterjoy.

For me this is not solved.
I just downloaded 2.0b and started it as administrator after I connected the pro controller via bluetooth. I made sure the input worked also in cemu before starting this program and it worked, but as soon as I started the program cemu does not react to input anymore.

However before starting the program to get the controller working I need to set up the button mapping for the controller to work in cemu. I'm not sure why you describe to leave it blank. Can you explain?

The program itself does not report any problems, but the controller does not work anymore from then onward until I disconnect and reconnect the controller.

Btw, I don't know why but I don't need to press the connect/sync button on my pro controller for windows to connect with it via bluetooth, it is enough to press any button.

When I first tried it (at that point when not running as administrator) I got some error from windows that an USB device stopped working. Not sure if that's connected to this issue.

In your description you say a decent Bluetooth device is required that allows 3 or 4 devices. How to know if the device I have is sufficient?

from betterjoy.

Hi @DragonMorkeleb !

Does CemuHook see the controller once BetterJoyForCemu is running? If so, then just make sure that "Also use for axes/buttons" is ticked under the motion source menu.

You don't need to assign the buttons to any input profile - the program takes exclusive control of the controller and just feeds the buttons to CemuHook directly. You currently can't reassign buttons.

from betterjoy.

Hey Davidobot.
Thanx for that. It did not originally show up. Now it does, finally.
I don't know what changed that though. Either connecting/disconnecting once more, starting everything as admin, or commenting out

[Input]
serverIP = 192.168.2.154

in cemuhook.ini (which was to send motion from my smartphone).

Could the last one have been a problem?

from betterjoy.

@DragonMorkeleb The last one was indeed the problem! I'll add that to the problems section in case other people have a similar issue, thanks.

from betterjoy.