How to create a DW1001 mote in Cooja? about contiki-uwb HOT 5 CLOSED

Hi, I am sorry but Cooja does not support that platform. This port only works with real devices.

from contiki-uwb.

Ow, that's a pity.

In this case, it is need to port the DW1001 platform to Cooja in order to make it a mote sample?
But anyway, thank you guys for the feedback.

from contiki-uwb.

Yes, some porting would be required for that. Just note that Cooja does not support ARM emulation, so you won't be able to run the ARM binary in simulation. Neither it supports DW1000 radio chip.

from contiki-uwb.

Hello Tim,

Maybe I misunderstood this application note from Decawave:

6.2.1 Contiki
[...] With the Cooja simulator a Contiki network can be simulated

https://www.decawave.com/sites/default/files/aps010_dw1000_wsn.pdf

from contiki-uwb.

You can use Cooja to emulate wireless networks based on older platforms such as Tmote Sky. Check this Wiki page.

Depending on your goal, you may be able to reuse the application-level code for Tmote Sky and any DW1000-based platform. Unfortunately, and as Tim pointed out, Cooja does not support ARM Cortex M emulation nor does it support the DW1000 radio transceiver. Hence, you won't be able to emulate any DW1000-based platform nor perform ranging or exploit any other low-level functionality from the DW1000 in Cooja.

from contiki-uwb.