T-Beam Communication problem about stratux HOT 2 OPEN

I have found a temporary solution, but it is not satisfying.

What I have found out so far.

When I run cat /dev/ttyACM0 it is empty, so no communication.

The log also says: serial port/baudrate detection err: Failed to detect GPS serial baudrate

Now I have written a script that resets the TTGO T-Beam: python3 esptool.py --chip esp32 --port /dev/serialin --baud 921600 run

Now it works fine, but what I don't know is why I need to reset the T-Beam.
Any ideas why it works only after a reset of the T-Beam?

from stratux.

You should repost this over on the current fork. https://github.com/b3nn0/stratux/issues

from stratux.