Multiple TUN adapters created about tunnelblick HOT 9 CLOSED

Can somebody else confirm this problem? I couldn't reproduce it. I tested on 
Leopard and Tiger. 

If so, I would need more detailed instructions on how to reproduce it, please.

Thanks,
Angelo

confirming here. Unfortunately it's the machine of a road warrior, so I cannot 
do
much to help you debug it. It may well have been a case of enabling sleep mode 
while
the VPN connection was open though. 

Trying to find out more.

Here's the part of the user's ifconfig output (indentation was destroyed by 
Skype
chat, I'm afraid)

en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::214:51ff:feed:60dc%en1 prefixlen 64 scopeid 0x6 
inet 192.168.2.36 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:14:51:ed:60:dc 
media: autoselect status: active
supported media: autoselect
tun0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.8.0.6 --> 10.8.0.5 netmask 0xffffffff 
open (pid 127)
tun1: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.8.0.10 --> 10.8.0.9 netmask 0xffffffff 
open (pid 904)
xxx-macbook-pro-15:~ $

Can you (phofstetter) or somebody else at least send me the openvpn config 
file? I've tried this with both tun 
and tap configurations. In my setups, it cleanly disconnects all connections 
before going to sleep and restarts 
them when waking up. Maybe it's something in your config file because this 
problem doesn't seem to affect all 
users.

Hi,

I've attached the configuration file used here. It's more or less the sample 
client
configuration that comes with gentoo.

I can reproduce the problem constantly by disabling the airport connection 
while the
VPN connection is active.

Philip

I've experienced this, too.  `ifconfig tun0 delete` leaves the interface 
listed, but starting another VPN connection 
afterwards allows the routes to be setup correctly again.

I experience this one frequently, infact it happened just now without the 
computer
sleeping, although that seems to normally be the trigger. Opening activity 
monitor
and filtering on 'openvpn' reveals several openvpn processes are running. I hit 
Quit
Process on them and reconnect and everything is fine for a while...

I should note, I am using Leopard not Tiger.

[deleted comment]

I think this was fixed in 3.0b10