Comments (14)
I also have stock Ender 3 S1 Pro and I'm not upgrading anything for now.
I only need S1 PRO firmware with Host Actions enabled for Octoprint
Uncommitted line in Configuration_adv.h
//#define HOST_ACTION_COMMANDS
Maybe you can release official S1 PRO firmware with Host Actions enabled ?
But it would be nice to have full source code for S1 PRO to do other modification by ourself.
So if I modify configuration.h from S1 source code to much S1 PRO temperatures
Change line in configuration.h
#define HEATER_0_MAXTEMP 275
to
#define HEATER_0_MAXTEMP 315
enable Host Actions in configuration_adv.h and build firmware from that, you will be able to send me privately matching S1 PRO Touch screen firmware and this will work?
How I can share my private email to you(@Creality-mandy) privately ?
from ender-3s1.
I'd also like to have an official version for the S1 PRO with host commands enabled
from ender-3s1.
We are not opening S1Pro screen source code at this moment. when use s1 version to upgrade. Not only to upgrade hardware, but also need to upgrade the software. If possible, we will send the screen produced file to you private by email. How about it?
No one asked you to open the screen source code, just publish the mainboard firmware what is based on Marlin and without you provide the source, you violate the GPL. Yes, you must, and really must provide the source with your modifications. What do you think about you are violating GPL? Is this ok for your company?
from ender-3s1.
Yes, the Pro version is available for S1, but if you only change software, without upgrading hardware, the temperature difference will become large. So we suggest you to upgrade into all mental throat tube.
from ender-3s1.
Hi, I do have an S1 Pro, so the hardware is already upgraded. Where can I find the source code?
from ender-3s1.
Hi, you can use S1 source code, it has the same parameters.
https://github.com/CrealityOfficial/Ender-3S1/blob/main/Marlin/Configuration_adv.h
from ender-3s1.
Ender 3 S1 Pro touch display is not working if you build firmware from S1 source code.
What should be changed to make it working ?
from ender-3s1.
from ender-3s1.
We are not opening S1Pro screen source code at this moment. when use s1 version to upgrade. Not only to upgrade hardware, but also need to upgrade the software. If possible, we will send the screen produced file to you private by email. How about it?
from ender-3s1.
Hi, you can use S1 source code, it has the same parameters. https://github.com/CrealityOfficial/Ender-3S1/blob/main/Marlin/Configuration_adv.h
This cannot be true. The S1 source code uses thermistor preset 1 (see Marlin/src/module/thermistor/thermistor_1.h). The highest value in the temptable for this thermistor is 300 C. Since the S1 Pro has a maximum user-selectable temperature of 300 C, the code must be different for the S1 Pro because the maximum temperature in the temptable needs to be higher than the maximum user-selectable temperature. Which thermistor temperature preset is used for the S1 Pro? Or is it using custom thermistor settings? If so, please provide these settings.
from ender-3s1.
We are not opening S1Pro screen source code at this moment. when use s1 version to upgrade. Not only to upgrade hardware, but also need to upgrade the software. If possible, we will send the screen produced file to you private by email. How about it?
I would appreciate this @Creality-mandy @CrealityTech !
from ender-3s1.
I also have stock Ender 3 S1 Pro and I'm not upgrading anything for now.
I only need S1 PRO firmware with Host Actions enabled for Octoprint Uncommitted line in Configuration_adv.h
//#define HOST_ACTION_COMMANDS
Maybe you can release official S1 PRO firmware with Host Actions enabled ?But it would be nice to have full source code for S1 PRO to do other modification by ourself.
So if I modify configuration.h from S1 source code to much S1 PRO temperatures Change line in configuration.h
#define HEATER_0_MAXTEMP 275
to#define HEATER_0_MAXTEMP 315
enable Host Actions in configuration_adv.h and build firmware from that, you will be able to send me privately matching S1 PRO Touch screen firmware and this will work?How I can share my private email to you(@Creality-mandy) privately ?
My email address is [email protected]
from ender-3s1.
Hi @Creality-mandy, I know that the sprite extruder pro is being sold as 300°C capable. The current source code for the S1 uses the thermistor type 1 in Marlin which absolute maximum value in temptable is 300 °C, so it is not posible to use that temperature.
Officially, what thermistor is the sprite extruder pro using?
from ender-3s1.
@Creality-mandy A PR was merged to enable HOST_ACTION_COMMANDS for the S1 #12
But no new firmware release for the S1 Pro yet. Is this coming soon?
We are unable to build it ourselves without access to the source code...
from ender-3s1.
Related Issues (20)
- Bad character in Configuration.h HOT 1
- v3.0.4 Source HOT 1
- Will this work with H/W VER CR-FDM-v2.5. S1_1 ? HOT 3
- PC0 pin as PWM? HOT 8
- Adjusting Z-Offset Factor on Stock Firmware HOT 2
- additional languages do not work HOT 1
- please push the latest S1 (not pro/plus) firmware changes
- Open source announcement HOT 2
- A way to downgrade screen firmware (Ender 3 S1)? HOT 3
- Continued Violations of Open Source Agreements HOT 5
- Ender S1 Pro - no leading zeroes on minutes in print progress monitor HOT 9
- ender 3s1 pro stuck black screen after update HOT 1
- Warnig src_filter HOT 2
- E3S1Pro ABL not working after power loss recovery
- Bed leveling can't be stopped/cancelled
- Is the Ender 3 s1 PLUS the same as the s1 PRO Firmware?
- No picture preview on latest firmware (27 Oct 2023)
- Please provide the latest source code HOT 3
- Config for Marlin
- New Ender 3 S1 Pro Firmware ignoring Cura speed and Accaleration settings
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ender-3s1.