AmplitudeView not showing raw due to error "model:667 Skipping spike waveforms" about phy HOT 6 OPEN

I set up phy2 on my new Windows 11. I successfully loaded up phy2 (phy TemplateGUI v2.0b5, phylib v2.4.3) using environment.yml (#1218). After launching phy template-gui params.py, I can open phy, but then encountered:

17:46:01.340 [W] model:603 Unreferenced clusters found in templates (generally not a problem) 17:46:01.640 [W] model:625 Unreferenced clusters found in spike_clusters (generally not a problem) 17:46:01.790 [W] model:667 Skipping spike waveforms that do not exist, they will be extracted on the fly from the raw data as needed.

I think that all phy operations would work, except for AmlitudeView not showing raw amplitude, which can be explained by model:667 sentence. I successfully ran phy using the same spike data on my old computer where phy2 was loaded more than three years ago (phy TemplateGUI v2.0a1, phylib v2.0a3). So, the error reason does not result from the data itself.

How can I fix it?

Thanks for your help!

-- PS. I attached the conda lists and "phy template-gui params.py --debug" outputs below. text1.txt text2.txt

Hi,
I am having the same problem. Did you fix this?
however, I don't think the not having the amplitude is due to "model:667 Skipping spike waveforms" .
you can solve the "skipping spike waveform" by the following command:
phy extract-waveforms params.py

from phy.

Thanks, alirza67! The "[W] model:667 Skipping spike waveforms" was gone after launching phy extract-waveforms params.py. I appreciate you.

Yet, it has no raw amplitude for AmplitudeView. That raw amplitude is very useful for removing sudden artifacts related to motion or LED illumination. So, I still need to fix it.

from phy.

@K-Onod,

Which KS are you using? I agree amplitudes are super important :) based on your --debug it looks like Phy thinks it's loading amplitudes. So I think we need to start with what sorter you used and are there amplitude files in the directory?

from phy.

Hi, zm711. Here is my dataset loaded in phy. Please let me know if you need actual files.

from phy.

And which kilosort are you using?

from phy.

I use kilosort 2.5.

from phy.