compile issues. what do I wrong? about esphome_c1101 HOT 5 CLOSED

Hi Remco!

Thanks for trying it out, lets see if we can get it working! Do note that I've just updated the code to reflect what was needed for #1

Assuming you are directly running it from HA itself, can you check if any of the clues in the below issue are helpful? I know there is a lot in there but it seems the issue is fixed (by the author of esphome) but might not be available. Especially esphome/issues#683 (comment) is referenced by him as being a solution.

Crossing fingers that solves this issue for you!

from esphome_c1101.

great! it worked. webserver works and buttons are available. but I can't join. I have a buva stream box. and the remotes look like a itho/stark but i see no signal that can recognised:

[14:11:33][D][custom:174]: Unknown state [14:11:33][D][text_sensor:015]: 'FanSpeed': Sending state 'High' [14:11:33][D][text_sensor:015]: 'FanTimer': Sending state '1800' [14:11:48][D][text_sensor:015]: 'FanSpeed': Sending state 'High' [14:11:48][D][text_sensor:015]: 'FanTimer': Sending state '1800' [14:12:03][D][text_sensor:015]: 'FanSpeed': Sending state 'High' [14:12:03][D][text_sensor:015]: 'FanTimer': Sending state '1800' [14:12:18][D][text_sensor:015]: 'FanSpeed': Sending state 'High' [14:12:18][D][text_sensor:015]: 'FanTimer': Sending state '1800' [14:12:33][D][text_sensor:015]: 'FanSpeed': Sending state 'High' [14:12:33][D][text_sensor:015]: 'FanTimer': Sending state '1800

from esphome_c1101.

Sorry about the delay in response, did you manage to get it working? A colleague of mine got it to work the same way I did earlier, by just unplug/replug the main unit and sending commands within the first (half?) minute or so the unit is on. It seems most units are in learning mode at least 30 seconds of sttartup.

from esphome_c1101.

Do you have any feedback on it?

from esphome_c1101.

Closing as per lack of feedback

from esphome_c1101.