ResetServer Won't Compile about ariadne-bootloader HOT 5 CLOSED

The EthernerReset library is currently utterly and completely broken. I am redesigning it to be more modular and use the new NetEEPROM and I haven't committed any of changes to it in a long time. I do not know when it is going to be ready but i will leave this bug open until then.

from ariadne-bootloader.

It should be working now. Please test it.

from ariadne-bootloader.

Thanks for the followup. I was able to compile and load the current version, but for some reason I still cannot seem to get it to actually work. For example, simply using the basic server mode (via port 80) has not generated any response.

In the course of testing this I initially could only get sketches to load via codebender cloud once every 50-75 times; it would normally fail. The write speed seemed extremely slow (very little action on the led) and I think it was timing out before completing. Previously I had been able to load via cloud pretty consistently.

After a few hours of confusion and a little frustration, I experimented by removing the 4GB microSD card I had inserted. As soon as I did that, cloud loads suddenly started working again, loading simple sketches within about 6 seconds.

While removing the card helped the cloud load, it did not seem to help the EthernetReset.

If you would like, I can add a separate issue for the microSD / cloud load problem.

Thanks again for all your help!

from ariadne-bootloader.

These seem to be 2 separate problems.

The ResetServer listens to port (8080) the other one on port (80) is just a dummy to indicate the correct order or initializing the servers. Also please make sure all the settings are set in the EEPROM. If you have not set a password, it defaults to ariadne. The URL, then, should be http://<arduino-ip>/ariadne/reset.

The issue with the SD is a whole other thing. I had never tested it with an SD card present as I don't have one.
If it is not much trouble, please create a different issue for this problem.

Thank you.

from ariadne-bootloader.

Works like a charm! This is exactly what I was hoping for with codebender - the ability to update the arduino anywhere from any device.

Thanks!

from ariadne-bootloader.