How to install burmillaOS and have it boot within Qubes? about os HOT 8 CLOSED

Can you test with v2.0.0-rc1?

I can confirm it works fine on QubesOS 4.1.2.

How to install burmillaOS and have it boot within Qubes?

1. Create it as standalone VM like described in https://www.qubes-os.org/doc/standalones-and-hvms/
2. Set Kernel to Provided by qube
3. Set Initial memory to 1024 MB
4. Boot from ISO
5. Install to disk with command: sudo ros install -d /dev/xvda --append rancher.password=Qwerty7
6. Boot from disk.
7. Configure networking like described in https://burmillaos.org/docs/networking/

However, if you are looking full QubesOS integration then most likely BurmillaOS is wrong tool for you and you should use something like Debian instead of.

from os.

Which version you are using?

Can you test with v2.0.0-rc1?

If that does not help then docker, dmesg logs would be useful. Afaik QubesOS is Xen based and I'm not sure if RancherOS ever was tested on that platform so we might miss some drivers, etc.

from os.

Thanks for your reply. Let me be more clear. I used the most recent release of Burmilla OS but I did not install it within qubes from the iso file. I used an ubuntu template OS and compiled/installed Burmilla OS. I thought this would somehow dockerize the OS itself, but it did not.

from os.

I will give more details later when I get home and can answer the version question. But it is the most recent version, I just pulled it from github.

from os.

So, I tried to use 'ros os version' and it says command not found, which is weird because I installed ros-noetic-ros-core in order to get everything else to install.

from os.

I used an ubuntu template OS and compiled/installed Burmilla OS. I thought this would somehow dockerize the OS itself, but it did not.

Sounds that you are trying to do something very odd. Just do installation from ISO instead of or if you need image then run installation example on qemu VM and copy that disk image to Qubes.

from os.

I cannot do an installation from ISO in this environment because there are drivers that need to be installed in order to be managed from the qubes interface.

from os.

Which drivers? In general there is no supported way to install 3rd party drivers to BurmillaOS. Those need to be included in kernel build place and we have included those widely already. Especially in latest RC which I asked you to try.

However some of them requires enabling kernel-extras package.

from os.