Zimodem, ESP not responding : wifi.disconnect() and more ? about zimodem HOT 3 CLOSED

I've lately been building using the rev dated 9/2/2016, but just to be certain, I downloaded the latest as of the time of this reply, build the firmware, uploaded it, and tested WiFi scanning and connection.

Are you using Arduino 1.6.11? Could it be the way it is calling the compiler, or some incompatibility with the other Arduino libraries? I'm afraid I'm just not seeing a problem.

I've tested this firmware with the ESP-01 and the NodeMCU hardware without problems.

from zimodem.

Hello,
Thank you for your help.
I reinstalled a windows pc with all the latest tools, but with no more luck on the same esp03 (not esp02 as stated in my first message). So I picked an esp01 from one of my past projects, and it works with your code, unmodified.
I think that my esp03 is broken... I'll try with an esp12 to be sure and update/close the issue when I have the time to try it.

So i'm very sorry that I took some of your time because of that...

from zimodem.

No problem. I'm glad you've figured it out!

from zimodem.