No Boot about wor-flasher HOT 15 CLOSED

Did you choose the Pi3 setting in the first window?
Did you wait 10 minutes to see if anything ever appeared on-screen? (Windows is extra slow to boot for the first time, and a Pi3 will be much slower than a Pi4)
Could you boot Raspbian on your Pi3, then insert the Windows sd card and send me screenshots of what each partition contains?

from wor-flasher.

yes i choose the Pi3 in the first window
i waited more than 10 minutes,the screen does not come on at all.
i also tried it in my Pi4 but got the same result

in the photo are the two visible partions in the card,the wim file is 3,6GB

from wor-flasher.

yes i choose the Pi3 in the first window
i waited more than 10 minutes,the screen does not come on at all.
i also tried it in my Pi4 but got the same result

The only solution I can think of is to delete the wor-flasher-files folder and to start over flashing. Let me know how it goes.

from wor-flasher.

i did and nothing changed no boot

from wor-flasher.

i did and nothing changed no boot

First, be aware that an image generated for a Pi3 won't work on a Pi4. And vice-versa.
Let's see if the problem is located in the Pi3-specific code in my flasher, or somewhere else.

To find out, @actraiser30, could you run WoR-flasher again as normal, but this time select the Pi4/Pi400 setting? Then boot the flashed drive with your Pi4, of course. If the Pi4 boots, we can try to pinpoint exactly why the Pi3-specific stuff is not working. If the Pi4 does not boot, then we will have to look at your hardware setup to try to see what is wrong.

from wor-flasher.

Pi4 boots windows 10,and after setup finished it says it needs an update it asks for wifi or lan connection,sometimes finishes reboots and the same thing goes over and over like it does nothing,and sometimes asks the same thing like there is no internet.

from wor-flasher.

I've just got the same problem with Pi3+ and options Win10 for Pi3/Pi2: don't boot after flasing image - only black screen

from wor-flasher.

There is also an issue on windows 10 in Rpi4 in first startup after setup ,it asks for wifi or Ethernet internet connection to do an important update and when i press next it cannot find any connection, i have the Ethernet cable connected and there is internet,can you take a look at it?

from wor-flasher.

There is also an issue on windows 10 in Rpi4 in first startup after setup ,it asks for wifi or Ethernet internet connection to do an important update and when i press next it cannot find any connection, i have the Ethernet cable connected and there is internet,can you take a look at it?

Ethernet works fine for me on Windows 10/11. Perhaps this is an issue with your country's website-blocking policy, or is caused by your ISP, or maybe by your local network. If you mean that the update check didn't succeed, that's normal - Windows on Raspberry is not capable of doing OS updates the normal way. See this article: https://www.worproject.ml/guides/performing-os-updates

from wor-flasher.

I dont mean within windows i mean in the first start after install finishes and you get a prompt to configure some things like region etc.

from wor-flasher.

I dont mean within windows i mean in the first start after install finishes and you get a prompt to configure some things like region etc.

If you mean that the update check didn't succeed, that's normal - Windows on Raspberry is not capable of doing OS updates the normal way. See this article: https://www.worproject.ml/guides/performing-os-updates

from wor-flasher.

The thing is it does not go any further if it does not do the update or check online
I installed windows in a card not usb

from wor-flasher.

The thing is it does not go any further if it does not do the update or check online
I installed windows in a card not usb

I'm going to try to replicate your setup - Windows 10 on a SD card for Pi4.

from wor-flasher.

I'm going to try to replicate your setup - Windows 10 on a SD card for Pi4.

Results: Windows 10 worked fine for me. I used Ethernet during the installation and it proceeded smoothly on the first attempt.
I'm not sure what was going on for @symbios24, but it works fine for me.

@symbios24 is welcome to open a new issue if this problem is still occurring.

from wor-flasher.

There is also an issue on windows 10 in Rpi4 in first startup after setup ,it asks for wifi or Ethernet internet connection to do an important update and when i press next it cannot find any connection, i have the Ethernet cable connected and there is internet,can you take a look at it?

I had the same issue and stumbled into this useful article: https://pureinfotech.com/bypass-internet-connection-install-windows-11/

from wor-flasher.