nvme0n1 not formatted? about wor-flasher HOT 4 OPEN

Is there a way I can save the error log ?

from wor-flasher.

log 20240528

Lower right corner of display screen:
Test Mode
Build 22621.ni_release_svc_prod3.231018-1809

Pop-up (on top of a popup)
Couldn't find the installation disk!
Make sure it is connected to your device and has all the files
necessary, then cick on the reload button.
If the error persosts, please check the log for more details.
OK

Popup goes away and the popup below the above popup is now in middle of display screen

Windows Setup About Logs X

  Windows on Raspberry
       Preinstallation Environment

You can install Windows

• the disk that contains the installation file, if it has at least 24 GB of space
• another disk that has at least 15 GB of available space.

Select the destination disk:
[nothing in drop down area ] [ @ ]

Click on Logs!

2023-03-16 03:49:50.9917 [info] WoR-PE (version 1.1.0.0)
2023-03-16 03:49:51.0565 [info] Copyright (c) 2018-2022 Mario Balanica. All Rights Reserved.
2023-03-16 03:49:51.0565 [info] OS: Windows (TM) 10 Preinstallation Environment ver 2009
(22621.2506.arm64fre.ni_release_svc_prod3.231018-1809)
2023-03-16 03:49:51.0676 [info] System model: Raspberry Pi 5 Model B
2023-03-16 03:49:51.0676 [info] Device display short name: Raspberry Pi 5 Model B
2023-03-16 03:49:51.0994 [debug] Loaded configuration file:
2023-03-16 03:49:51.0994 [debug] PreferredImageEditionId:Professional
2023-03-16 03:49:51.1284 [info] Loading driver list...
2023-03-16 03:49:51.1331 [info] Drivers loaded successfully!
2023-03-16 03:49:55.2336 [info] Loading disks...
2023-03-16 03:49:55.7342 [info] Disk 0 - CT500P3PSSD8 - Fixed hard disk media - 465 GB
2023-03-16 03:49:55.7342 [info] 1 disk(s) found
2023-03-16 03:49:55.7396 [info] Finding PE disk...
2023-03-16 03:49:55.7396 [info] Mounting partitions on disk 0...
2023-03-16 03:49:55.7672 [debug] Creating diskpart script with the following commands: select disk0 , select
partition1 , assign letter=A, exit
2023-03-16 03:49:55.7754 [debug] Launch diskpart.exe with the following arguments: /s "X:\diskpart.script"
2023-03-16 03:49:57.1336 [debug] diskpart.exe process output:
2023-03-16 03:49:57.1336 [debug] Standard Output:

Microsoft DiskPart version 10.0.22621.1

Copyright (c) Microsoft Corporation
On Computer: MINWINPC

Disk 0 is now the selected disk.

Virtual Disk Service error.
The disk is not initialized.

2023-03-16 03:49:57.1336 [warn] Exit code: -2147212265
2023-03-16 03:49:57.1336 [warn] Couldn't mount the partitions!
2023-03-16 03:49:57.1336 [error] Couldn't find the PE disk!

from wor-flasher.

One more thing. After the script ends there is a message in the command box:

1. ~/wor-flasher/install-wor-gui.sh
   Install-wor.sh script has completed.

(yad:3237): Gdk-CRITICAL **: 12:04:20.018: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed

from wor-flasher.

When I ran the install script: install-wor.sh I did this:
20240530

1. Boot into Bookworm
2. /home/username/wor-flasher directory
3. edit script install-wor.sh
4. add echo on just below the #!/bin/bash/
5. Add read -p "Echo to Continue... Script has Completed" after last line in script
   Will prevent the command window from disappearing
   Save
6. double click install-wor.sh and execute in a terminal
7. When you see the "Enter to Continue... Script has Completed" message
   Click Terminal on command box menu line. The option "Save Contents" will
   capture screen - you have to provide the file name
   Will capture to the directory /home/username/wor-flasher-files/ your filename

from wor-flasher.