Comments (9)
BlazejosP
commented on May 24, 2024
1
Hello @djmdka and thanks @januweness for this explanations for him
answer of this your question is here #34 (comment)
Just short summary:
Old accounts created before June 30, 2022 can work with old style getStationList
Accounts created after this date need new function stations instead.
This is not implemented yet because I just today receive new manual look to this mentioned post and that will take some time (around a few days) to code this into working function. But if you d'like upload working bash code which you done themself I will be rely happy to accept.
BTW @januweness what do you think about this constant changes of function login_to_api (line 942 of functions.sh) and extraction of token I just think that is some way possible to code this in dynamic form that even after changes of position of token in sub-strings token can be extracted correctly regardless of position. So if that type of code will be there there will be not necessary to improve this part after every Huawei server upgrade?
from huawei-sun2000-api-cli.
januweness
commented on May 24, 2024
Hi, this will have to do with the way the token is extracted in function login_to_api (line 942 of functions.sh). The string returned from the API call needs to be split into sub-strings, one of them containing the token. This changes with almost every update of the server.
If you make the following changes in functions.sh it should work:
Line 1002
< local logowanie=${array[22]}
---
local logowanie=${array[27]}
Line 1005
< IFS='
< '
---
IFS='='
Line 1014
< local logowanie=${array[0]}
---
local logowanie=${array[1]}
Line 1028
< IFS=' '
---
IFS=';'
Cheers, Jan-Uwe
From: djmdka ***@***.***>
Sent: 24 May 2023 14:35
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: Subscribed ***@***.***>
Subject: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Please see below. I am using "Ubuntu 22.04.2 LTS" and installed all the packages as described in the documentation. However, I am not able to get any data, except for the following:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at :1): Cannot iterate over null (null)
ndefined Error
\nReturned data:
-
Reply to this email directly, view it on GitHub<#35>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ADDQAIZ6OHPN2SACCTXHX55RANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.***>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***).
from huawei-sun2000-api-cli.
djmdka
commented on May 24, 2024
Hello,
Thank you for your quick response. Performed the changes, and now the error has changed to this:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at <stdin>:1): Cannot iterate over null (null)
API getStationList connection Error
ou do not have the permission on the related data interface.
Optional message: "Invalid access to current interface!"
Plant 1:
Plant Name:
Address of the plant:
Installed capacity: MWp
Plant contact:
Contact phone number:
Plant Status: Unknown
Grid connection type: Unknown
Poverty alleviation plant: Unknown
parse error: Unfinished string at EOF at line 2, column 0
parse error: Unfinished string at EOF at line 2, column 0
Message: Don't know when
Please wait disconnecting!
Disconnection from API
API logout from server OK
Logout accepted by Huawei Server
Normal Status
From: Jan-Uwe Ness ***@***.***>
Sent: 24, May, 2023 16:01 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: djmdka ***@***.***>; Author ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi, this will have to do with the way the token is extracted in function login_to_api (line 942 of functions.sh). The string returned from the API call needs to be split into sub-strings, one of them containing the token. This changes with almost every update of the server.
If you make the following changes in functions.sh it should work:
Line 1002
< local logowanie=${array[22]}
---
local logowanie=${array[27]}
Line 1005
< IFS='
< '
---
IFS='='
Line 1014
< local logowanie=${array[0]}
---
local logowanie=${array[1]}
Line 1028
< IFS=' '
---
IFS=';'
Cheers, Jan-Uwe
From: djmdka ***@***.*** <mailto:***@***.***> >
Sent: 24 May 2023 14:35
To: BlazejosP/huawei-sun2000-API-CLI ***@***.*** <mailto:***@***.***> >
Cc: Subscribed ***@***.*** <mailto:***@***.***> >
Subject: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Please see below. I am using "Ubuntu 22.04.2 LTS" and installed all the packages as described in the documentation. However, I am not able to get any data, except for the following:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at :1): Cannot iterate over null (null)
ndefined Error
\nReturned data:
-
Reply to this email directly, view it on GitHub<#35>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ADDQAIZ6OHPN2SACCTXHX55RANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.*** <mailto:***@***.******@***.***> >>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.*** <mailto:***@***.***> ).
—
Reply to this email directly, view it on GitHub <#35 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEN7UI6XPD6MTAIRS5LP3WDXHYA7RANCNFSM6AAAAAAYNJ7N74> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AEN7UI2JFTWPDTTGT7XN5SDXHYA7RA5CNFSM6AAAAAAYNJ7N76WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS5BSHT4.gif> Message ID: ***@***.*** ***@***.***> >
from huawei-sun2000-api-cli.
januweness
commented on May 24, 2024
Hi, you may not have the permission to access your plant data, this is usually only granted to the installer, not the owner. I think your installer has to grant you access permission.
Cheers, Jan-Uwe
From: djmdka ***@***.***>
Sent: 24 May 2023 15:08
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: juness ***@***.***>; Comment ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Thank you for your quick response. Performed the changes, and now the error has changed to this:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at <stdin>:1): Cannot iterate over null (null)
API getStationList connection Error
ou do not have the permission on the related data interface.
Optional message: "Invalid access to current interface!"
Plant 1:
Plant Name:
Address of the plant:
Installed capacity: MWp
Plant contact:
Contact phone number:
Plant Status: Unknown
Grid connection type: Unknown
Poverty alleviation plant: Unknown
parse error: Unfinished string at EOF at line 2, column 0
parse error: Unfinished string at EOF at line 2, column 0
Message: Don't know when
Please wait disconnecting!
Disconnection from API
API logout from server OK
Logout accepted by Huawei Server
Normal Status
From: Jan-Uwe Ness ***@***.***<mailto:***@***.***>>
Sent: 24, May, 2023 16:01 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***>>
Cc: djmdka ***@***.***<mailto:***@***.***>>; Author ***@***.***<mailto:***@***.***>>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi, this will have to do with the way the token is extracted in function login_to_api (line 942 of functions.sh). The string returned from the API call needs to be split into sub-strings, one of them containing the token. This changes with almost every update of the server.
If you make the following changes in functions.sh it should work:
Line 1002
< local logowanie=${array[22]}
---
local logowanie=${array[27]}
Line 1005
< IFS='
< '
---
IFS='='
Line 1014
< local logowanie=${array[0]}
---
local logowanie=${array[1]}
Line 1028
< IFS=' '
---
IFS=';'
Cheers, Jan-Uwe
From: djmdka ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Sent: 24 May 2023 14:35
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Cc: Subscribed ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Subject: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Please see below. I am using "Ubuntu 22.04.2 LTS" and installed all the packages as described in the documentation. However, I am not able to get any data, except for the following:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at :1): Cannot iterate over null (null)
ndefined Error
\nReturned data:
-
Reply to this email directly, view it on GitHub<#35>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ADDQAIZ6OHPN2SACCTXHX55RANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.***<mailto:***@***.******@***.***> <mailto:***@***.******@***.***> >>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***<mailto:***@***.***> <mailto:***@***.***> ).
-
Reply to this email directly, view it on GitHub <#35 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEN7UI6XPD6MTAIRS5LP3WDXHYA7RANCNFSM6AAAAAAYNJ7N74> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AEN7UI2JFTWPDTTGT7XN5SDXHYA7RA5CNFSM6AAAAAAYNJ7N76WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS5BSHT4.gif> Message ID: ***@***.***<mailto:***@***.***> ***@***.***<mailto:***@***.***>> >
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3AENMWVHRGD3QVFF7N3XHYB4FANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.***>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***).
from huawei-sun2000-api-cli.
djmdka
commented on May 24, 2024
I am also the installer. I created the API and allowed myself access to every parameter.Is there anything else I have to specify other than the API user and password within the conf file?On May 24, 2023 16:42, Jan-Uwe Ness ***@***.***> wrote:
Hi, you may not have the permission to access your plant data, this is usually only granted to the installer, not the owner. I think your installer has to grant you access permission.
Cheers, Jan-Uwe
From: djmdka ***@***.***>
Sent: 24 May 2023 15:08
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: juness ***@***.***>; Comment ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Thank you for your quick response. Performed the changes, and now the error has changed to this:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at <stdin>:1): Cannot iterate over null (null)
API getStationList connection Error
ou do not have the permission on the related data interface.
Optional message: "Invalid access to current interface!"
Plant 1:
Plant Name:
Address of the plant:
Installed capacity: MWp
Plant contact:
Contact phone number:
Plant Status: Unknown
Grid connection type: Unknown
Poverty alleviation plant: Unknown
parse error: Unfinished string at EOF at line 2, column 0
parse error: Unfinished string at EOF at line 2, column 0
Message: Don't know when
Please wait disconnecting!
Disconnection from API
API logout from server OK
Logout accepted by Huawei Server
Normal Status
From: Jan-Uwe Ness ***@***.***<mailto:***@***.***>>
Sent: 24, May, 2023 16:01 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***>>
Cc: djmdka ***@***.***<mailto:***@***.***>>; Author ***@***.***<mailto:***@***.***>>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi, this will have to do with the way the token is extracted in function login_to_api (line 942 of functions.sh). The string returned from the API call needs to be split into sub-strings, one of them containing the token. This changes with almost every update of the server.
If you make the following changes in functions.sh it should work:
Line 1002
< local logowanie=${array[22]}
---
local logowanie=${array[27]}
Line 1005
< IFS='
< '
---
IFS='='
Line 1014
< local logowanie=${array[0]}
---
local logowanie=${array[1]}
Line 1028
< IFS=' '
---
IFS=';'
Cheers, Jan-Uwe
From: djmdka ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Sent: 24 May 2023 14:35
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Cc: Subscribed ***@***.***<mailto:***@***.***> <mailto:***@***.***> >
Subject: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Please see below. I am using "Ubuntu 22.04.2 LTS" and installed all the packages as described in the documentation. However, I am not able to get any data, except for the following:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at :1): Cannot iterate over null (null)
ndefined Error
\nReturned data:
-
Reply to this email directly, view it on GitHub<#35>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ADDQAIZ6OHPN2SACCTXHX55RANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.***<mailto:***@***.******@***.***> <mailto:***@***.******@***.***> >>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***<mailto:***@***.***> <mailto:***@***.***> ).
-
Reply to this email directly, view it on GitHub <#35 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEN7UI6XPD6MTAIRS5LP3WDXHYA7RANCNFSM6AAAAAAYNJ7N74> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AEN7UI2JFTWPDTTGT7XN5SDXHYA7RA5CNFSM6AAAAAAYNJ7N76WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS5BSHT4.gif> Message ID: ***@***.***<mailto:***@***.***> ***@***.***<mailto:***@***.***>> >
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3AENMWVHRGD3QVFF7N3XHYB4FANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.***>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***).
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
from huawei-sun2000-api-cli.
januweness
commented on May 24, 2024
Hi, nothing else should be necessary. After including my credentials into conf.dat (and the changes mentioned), I get the following output:
./fusionsolarapp.sh
PI-
Please wait connecting!
Connection to API
PI-
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
API getStationList connection OK
Normal Status
Time of your Request to API: wo 24 mei 2023 15:49:38 CEST
Plant 1: XXXXXXXXXXXXXXXXXXXXXXXXXXXX
Plant Name: XXXXXXXX
Address of the plant: XXXXXXXXXXXXXXX
Installed capacity: 0.00124 MWp
Plant contact: XXXXXXXXXXXX
Contact phone number: ***@***.***>
Poverty alleviation plant: No
Activated functions for Station: XXXXXXXXXXXXXXXXXXXXX
Please wait disconnecting!
Disconnection from API
API logout from server OK
Logout accepted by Huawei Server
Normal Status
(My personal data replaced by XXXXXXX). So, all working fine. Strange it doesn't work for you, sorry, I can't help further. Maybe you get some clues by uncommenting lines 1519 and 1520 (after the changes).
From: djmdka ***@***.***>
Sent: 24 May 2023 15:48
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: juness ***@***.***>; Comment ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
I am also the installer. I created the API and allowed myself access to every parameter.Is there anything else I have to specify other than the API user and password within the conf file?On May 24, 2023 16:42, Jan-Uwe Ness ***@***.***<mailto:***@***.***>> wrote:
Hi, you may not have the permission to access your plant data, this is usually only granted to the installer, not the owner. I think your installer has to grant you access permission.
Cheers, Jan-Uwe
From: djmdka ***@***.***<mailto:***@***.***>>
Sent: 24 May 2023 15:08
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***>>
Cc: juness ***@***.***<mailto:***@***.***>>; Comment ***@***.***<mailto:***@***.***>>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Thank you for your quick response. Performed the changes, and now the error has changed to this:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at <stdin>:1): Cannot iterate over null (null)
API getStationList connection Error
ou do not have the permission on the related data interface.
Optional message: "Invalid access to current interface!"
Plant 1:
Plant Name:
Address of the plant:
Installed capacity: MWp
Plant contact:
Contact phone number:
Plant Status: Unknown
Grid connection type: Unknown
Poverty alleviation plant: Unknown
parse error: Unfinished string at EOF at line 2, column 0
parse error: Unfinished string at EOF at line 2, column 0
Message: Don't know when
Please wait disconnecting!
Disconnection from API
API logout from server OK
Logout accepted by Huawei Server
Normal Status
From: Jan-Uwe Ness ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>>>
Sent: 24, May, 2023 16:01 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>>>
Cc: djmdka ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>>>; Author ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>>>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi, this will have to do with the way the token is extracted in function login_to_api (line 942 of functions.sh). The string returned from the API call needs to be split into sub-strings, one of them containing the token. This changes with almost every update of the server.
If you make the following changes in functions.sh it should work:
Line 1002
< local logowanie=${array[22]}
---
local logowanie=${array[27]}
Line 1005
< IFS='
< '
---
IFS='='
Line 1014
< local logowanie=${array[0]}
---
local logowanie=${array[1]}
Line 1028
< IFS=' '
---
IFS=';'
Cheers, Jan-Uwe
From: djmdka ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>> <mailto:***@***.***> >
Sent: 24 May 2023 14:35
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>> <mailto:***@***.***> >
Cc: Subscribed ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>> <mailto:***@***.***> >
Subject: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hello,
Please see below. I am using "Ubuntu 22.04.2 LTS" and installed all the packages as described in the documentation. However, I am not able to get any data, except for the following:
./fusionsolarapp.sh
Please wait connecting!
Connection to API
API login to server OK
Username & Password accepted by Huawei Server
Normal Status
jq: error (at :1): Cannot iterate over null (null)
ndefined Error
\nReturned data:
-
Reply to this email directly, view it on GitHub<#35>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ADDQAIZ6OHPN2SACCTXHX55RANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.***<mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>> <mailto:***@***.******@***.***> >>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>> <mailto:***@***.***> ).
-
Reply to this email directly, view it on GitHub <#35 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEN7UI6XPD6MTAIRS5LP3WDXHYA7RANCNFSM6AAAAAAYNJ7N74> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AEN7UI2JFTWPDTTGT7XN5SDXHYA7RA5CNFSM6AAAAAAYNJ7N76WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS5BSHT4.gif> Message ID: ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>> ***@***.***<mailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***>>> >
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3AENMWVHRGD3QVFF7N3XHYB4FANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.***<mailto:***@***.******@***.***>>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***<mailto:***@***.***>).
…-Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***<mailto:***@***.***>>
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3ABJISMATGFRA5CTVM3XHYGQBANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.***>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***).
from huawei-sun2000-api-cli.
djmdka
commented on May 24, 2024
Hi again,I opened a ticket to Huawei regarding this matter and I got their answer here:"From what I see the problem is that you are using getStationList as interface to get the plants, which is wrong. (getStationList interface is no longer used). Instead of getStationList, customer needs to use stations interface. "I also got the full documentation which I can share if you want.
from huawei-sun2000-api-cli.
januweness
commented on May 24, 2024
Hi, if you could share the full document in some way, that would be great.
I am using getSationList and it works, so the answer is a bit strange.
From: djmdka ***@***.***>
Sent: Thursday, May 25, 2023 12:52 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: juness ***@***.***>; Comment ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi again,I opened a ticket to Huawei regarding this matter and I got their answer here:"From what I see the problem is that you are using getStationList as interface to get the plants, which is wrong. (getStationList interface is no longer used). Instead of getStationList, customer needs to use stations interface. "I also got the full documentation which I can share if you want.
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3AFW5WGLQ7SF3W7PNWTXH42UZANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.***>>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.***).
from huawei-sun2000-api-cli.
djmdka
commented on May 24, 2024
Hi
I uploaded to my personal cloud. See link below:
https://cloud.pfamm.ro/index.php/s/R2eNwq0VC4cVp8z
From: Jan-Uwe Ness ***@***.***>
Sent: 25, May, 2023 14:34 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.***>
Cc: djmdka ***@***.***>; Author ***@***.***>
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi, if you could share the full document in some way, that would be great.
I am using getSationList and it works, so the answer is a bit strange.
From: djmdka ***@***.*** <mailto:***@***.***> >
Sent: Thursday, May 25, 2023 12:52 PM
To: BlazejosP/huawei-sun2000-API-CLI ***@***.*** <mailto:***@***.***> >
Cc: juness ***@***.*** <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***> >
Subject: Re: [BlazejosP/huawei-sun2000-API-CLI] Cannot get any data except "Normal status" (Issue #35)
Hi again,I opened a ticket to Huawei regarding this matter and I got their answer here:"From what I see the problem is that you are using getStationList as interface to get the plants, which is wrong. (getStationList interface is no longer used). Instead of getStationList, customer needs to use stations interface. "I also got the full documentation which I can share if you want.
-
Reply to this email directly, view it on GitHub<#35 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABTM3AFW5WGLQ7SF3W7PNWTXH42UZANCNFSM6AAAAAAYNJ7N74>.
You are receiving this because you commented.Message ID: ***@***.******@***.*** <mailto:***@***.******@***.***> >>
This message is intended only for the recipient(s) named above. It may contain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer ***@***.*** <mailto:***@***.***> ).
—
Reply to this email directly, view it on GitHub <#35 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEN7UI3S5B36F2JAJZYO7GTXH47RVANCNFSM6AAAAAAYNJ7N74> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AEN7UIYCBZUCMKNUOQ4RPX3XH47RVA5CNFSM6AAAAAAYNJ7N76WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS5EWOHG.gif> Message ID: ***@***.*** ***@***.***> >
from huawei-sun2000-api-cli.
Related Issues (20)
- order in device_Id_array HOT 2
- info about fusionsolarapp.sh
- Problem with login to fusionSolarApp service from this software HOT 10
- Kioskmode.sh HOT 1
- getStationRealKpi - problem HOT 2
- TUI implemended but need feedback about other devices in plant HOT 54
- Database schema HOT 10
- getDevRealKpi date: invalid date ‘@’ HOT 23
- Offer to contribute HOT 2
- Problems with login to huawei server since 30th December 2021 after huawei upgrade HOT 10
- XSRF-TOKEN valid time HOT 1
- Home Assistant integration HOT 1
- Different Huawei setup configurations from Kisoskmode.sh post your own here HOT 1
- Login error HOT 1
- Poblem with functions.sh HOT 3
- jq: error (at <stdin>:1): Cannot iterate over null (null) HOT 5
- jq error since 04-03-2023 HOT 2
- API getStationList connection Error HOT 6
- close to real time HOT 21
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from huawei-sun2000-api-cli.