Comments (3)
Entire command list
/mitti/1/audioOff: Turns Off Audio on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/audioOn: Turns On Audio on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/blue: Changes the blue of the Cue. Required value is a float (0.00 - 1.00).
/mitti/1/brightness: Changes the brightness of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/1/contrast: Changes the contrast of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/1/fadeInOff: Turns Off Fade In on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/fadeInOn: Turns On Fade In on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/fadeOutOff: Turns Off Fade Out on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/fadeOutOn: Turns On Fade Out on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/green: Changes the green of the Cue. Required value is a float (0.00 - 1.00).
/mitti/1/jump: Jumps to the beginning of the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/loopOff: Turns Off Looping on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/loopOn: Turns On Looping on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/opacity: Changes the opacity of the Cue. Required value is a float (0.00 - 1.00).
/mitti/1/pan: Changes the pan of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/1/pauseAtBeginningOff: Turns Off Pause-at-Beginning feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/pauseAtBeginningOn: Turns On Pause-at-Beginning feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/pauseAtEndOff: Turns Off Pause-at-End feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/pauseAtEndOn: Turns On Pause-at-End feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/red: Changes the red component of the Cue. Required value is a float (0.00 - 1.00).
/mitti/1/select: Selects the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/toggleAudio: Toggle Audio On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/toggleFadeIn: Toggle Fade In On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/toggleFadeOut: Toggle Fade Out On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/toggleLoop: Toggle Looping On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/togglePauseAtBeginning: Toggle Pause-at-Beginning feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/togglePauseAtEnd: Toggle Pause-at-End feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/toggleTransition: Toggle Transition feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/toggleVideoFx: Toggle FX On/Off on the Cue. Required value is an int (0 - 1).
/mitti/1/transitionOff: Turns Off Transition feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/transitionOn: Turns On Transition feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/videoFxOff: Turns Off Video Effect on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/videoFxOn: Turns On Video Effect on the Cue. It does not require any value. Also available as UDP String command.
/mitti/1/volume: Changes the volume of the Cue. Required value is a float (0.00 - 2.00).
/mitti/2/audioOff: Turns Off Audio on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/audioOn: Turns On Audio on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/blue: Changes the blue of the Cue. Required value is a float (0.00 - 1.00).
/mitti/2/brightness: Changes the brightness of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/2/contrast: Changes the contrast of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/2/fadeInOff: Turns Off Fade In on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/fadeInOn: Turns On Fade In on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/fadeOutOff: Turns Off Fade Out on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/fadeOutOn: Turns On Fade Out on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/green: Changes the green of the Cue. Required value is a float (0.00 - 1.00).
/mitti/2/jump: Jumps to the beginning of the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/loopOff: Turns Off Looping on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/loopOn: Turns On Looping on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/opacity: Changes the opacity of the Cue. Required value is a float (0.00 - 1.00).
/mitti/2/pan: Changes the pan of the Cue. Required value is a float (-1.00 - 1.00).
/mitti/2/pauseAtBeginningOff: Turns Off Pause-at-Beginning feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/pauseAtBeginningOn: Turns On Pause-at-Beginning feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/pauseAtEndOff: Turns Off Pause-at-End feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/pauseAtEndOn: Turns On Pause-at-End feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/red: Changes the red component of the Cue. Required value is a float (0.00 - 1.00).
/mitti/2/select: Selects the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/toggleAudio: Toggle Audio On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/toggleFadeIn: Toggle Fade In On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/toggleFadeOut: Toggle Fade Out On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/toggleLoop: Toggle Looping On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/togglePauseAtBeginning: Toggle Pause-at-Beginning feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/togglePauseAtEnd: Toggle Pause-at-End feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/toggleTransition: Toggle Transition feature On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/toggleVideoFx: Toggle FX On/Off on the Cue. Required value is an int (0 - 1).
/mitti/2/transitionOff: Turns Off Transition feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/transitionOn: Turns On Transition feature on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/videoFxOff: Turns Off Video Effect on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/videoFxOn: Turns On Video Effect on the Cue. It does not require any value. Also available as UDP String command.
/mitti/2/volume: Changes the volume of the Cue. Required value is a float (0.00 - 2.00).
/mitti/goto10: Jumps to the last 10 seconds of the Current Cue. It does not require any value. Also available as UDP String command.
/mitti/goto20: Jumps to the last 20 seconds of the Current Cue. It does not require any value. Also available as UDP String command.
/mitti/goto30: Jumps to the last 30 seconds of the Current Cue. It does not require any value. Also available as UDP String command.
/mitti/jumpToCueWithName: Jumps to the first Cue with the same name as in the parameter. Required value is a string.
/mitti/jumpToNextCue: Jumps to the next Cue. It does not require any value. Also available as UDP String command.
/mitti/jumpToPrevCue: Jumps to the previous Cue. It does not require any value. Also available as UDP String command.
/mitti/locate: Locates to the timecode or seconds specified in the parameter. Required value is a string.
/mitti/loopOff: Turns off Playlist Looping It does not require any value. Also available as UDP String command.
/mitti/loopOn: Turns on Playlist Looping. It does not require any value. Also available as UDP String command.
/mitti/mainFader: Controls the Main Fader. Required value is a float (0.00 - 1.00).
/mitti/panic: Triggers the Panic mode. It does not require any value. Also available as UDP String command.
/mitti/play: Starts playback if not already started. It does not require any value. Also available as UDP String command.
/mitti/playhead: Sets the playhead of the current Cue - works only when the Playlist stopped. Required value is a float (0.00 - 1.00).
/mitti/playSelectedCue: Plays the selected Cue. It does not require any value. Also available as UDP String command.
/mitti/rewind: Rewinds the Current Cue. It does not require any value. Also available as UDP String command.
/mitti/selectCurrentCue: Selects the Current Cue. It does not require any value. Also available as UDP String command.
/mitti/selectNextCue: Selects the next Cue. It does not require any value. Also available as UDP String command.
/mitti/selectPrevCue: Selects the previous Cue. It does not require any value. Also available as UDP String command.
/mitti/stop: Stops playback if not already stopped. It does not require any value. Also available as UDP String command.
/mitti/toggleLoop: Toggle On/Off Playlist Looping. Required value is an int (0 - 1).
/mitti/togglePlay: Starts or stops playback. Required value is an int (0 - 1).
from companion.
Done in 1.0.7
from companion.
Feedback will come in 2.x.x :)
from companion.
Related Issues (20)
- Sorry, is there a way to add custom farlight variables for atem audio That b use atem sdi pro iso and I'm sorry for my language i use Google translate 😅
- [BUG] Reset admin password HOT 1
- API: GET-Requests for all variables HOT 1
- [BUG] Some buttons don't draw HOT 4
- Feedback for Button Duration Groups HOT 3
- Multi-button select for copy/paste/delete HOT 4
- Push&rotate action HOT 1
- [BUG] Multiple variable substitutions fail from button presets HOT 3
- [Request]provide clean boilerplate to start v3 module development HOT 1
- [BUG] XAIR 18 - after re-powering the connection is lost HOT 1
- Change a conditional variable
- [Feat] Preset text fields HOT 1
- [BUG] Adding Action Step returns error HOT 1
- dynamically generated actions break "isVisible" field HOT 2
- Next / Previous dropdown selection via action HOT 2
- [Feat] Daemon for interaction with OS and hardware HOT 7
- Improve UI by truncating long variables
- Streamdeck neo: utilise lcd strip HOT 2
- Add border outline color to text on buttons HOT 1
- [BUG] Http GET CustomVariable does not get called HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from companion.