Hackintool 3.4.0 gives me an empty Properties block when patching via DeviceProperties about hackintool HOT 5 OPEN

This patch work for config.plist only OpenCore bootloader. Not run Clover bootloader.

from hackintool.

Open Hackintool go to Boot tab and change auto to Clover and patch now.

from hackintool.

Changed from Auto to Clover, but no change. It still won't add any video options when generating a patch.

from hackintool.

If you have a headless GPU you will need to use the "Inject Fake iGPU" option.

from hackintool.

That did it. Strange, I hadn't checked that box previously and it was working, then inexplicably didn't. None of the other options seem to make a difference in whether or not it generates, but at least I can get something generated. Also, if I'm trying to enable a headless iGPU while using a dGPU, should it be generating "onboard-1" for the iGPU? I've heard mixed messages on that. Perhaps there's another option I've missed. Hackintool also doesn't recognize my iGPU properly. It sees it, but in Patch -> Info -> Current Framebuffer, I see that the Platform ID and GPU Device ID are 0x0 and GPU Name is ???. I'm using an iMac 17,1 SMBIOS, i7 6700k, Gigabyte Z170X-UD3 Rev 1, MacOS 10.14.6. The iGPU is enabled in BIOS, 64MB DVMT, and System -> GFX0 shows the correct GPU Device ID and Name, but that's it. I think I need to get the patches working correctly to see the additional information and know that it's working properly.

Also, as an afterward, the tooltip on "Inject Fake iGPU" is incorrect. It references USB injection.

from hackintool.