ddate
is a library and commandline utility for converting from boring Thuddite dates to proper Erisian ones.
- Can be
require()
d as a library to do your own conversions - User configurable (via the conf module, but you have to find the file yourself right now)
- Reasonably simple command line interface, manually implemented for no option handling dependencies
- From the library (not commandline), you can convert back from Erisian to Gregorian
- Almost definitely 100% accurate, probably!
- A test suite for every single day of the year (I'd like to guarantee that 100% accuracy)
- Try for backwards-compatibility with the old
ddate
utility's interface (what even is the oldddate
's CLI?) - More advanced date parsing (I am not writing this manually, so it'll be an optional dependency)
Install via npm with npm i @princessrtfm/ddate
. Add the -g
flag to install globally if you want to run it from anywhere. You should definitely want to run it from anywhere.
This is absolutely not a drop-in replacement for the old ddate
utility. It has a clear and relatively simple interface, which can be further customised through the user configuration and the command line flags, but I couldn't fit the neatness of this into the old style. Yet. We'll see what I can do.
At present, the configuration file is managed via the conf module, and you have to hand-edit it until I write a configurator. I recommend using a JSON-aware IDE. The settings are listed below. The command line flags are also listed below, but higher.
-
--date
-d
Allows you to specify the (anerisian) date to convert. At present, it needs to be a format that
new Date()
will understand, which means that Unix timestamps need to be converted to measure milliseconds.Alternatively, starting with version 1.1.0 (technically, since commit bd45cbb on 2020-07-20) you can use ISO 8601, which is loosely parsed. It should be the four-digit year, the one-or-two-digit month, and then the one-or-two-digit day; the separator may be a hypen or any (singular) whitespace character.
-
--format
--fmt
-f
Allows you to specify a particular output format for the Erisian date, according to the Format Specifiers section below.
-
--short
-s
Flags for short output, which will hide the boring Thuddite date in the output. Only the Erisian date (according to your format string) will be printed.
-
--long
-l
Flags for long output, which will prefix the Erisian date (according to your format string) with the anerisian date being converted. The anerisian date will be output via
toLocaleDateString()
with thelocaleFormatOptions
in your configuration file. -
--Live
-L
Flags for live output, which keeps the script running and updates the output occasionally. You can provide an update delay yourself if you want, as a number followed by a letter:
s
for seconds (the default with no unit),m
for minutes, andh
for hours. If you don't provide a delay, the default is every minute. When running in a terminal (STDOUT is a TTY) the update will rewrite itself each time; otherwise the output will be a new line every time.The
--date
/-d
option is ignored when using live update mode, since it wouldn't make any sense. Live update mode recalculates the erisian date every time it updates the output, since not doing that would be pointless and weird.
When you require('@princessrtfm/ddate')
, the returned value is the DDate
class. There are two ways to instantiate it: the normal constructor (new DDate(...)
), and DDate.from(...)
.
There are two ways to create a new DDate
object, depending on what kind of initial date representation you have. If you have a Gregorian representation or an existing DDate
object to clone, use the standard constructor. If you have an Erisian representation, use DDate.from(...)
instead.
Accepts a single argument, which can be any of the following (and will be checked in this order):
-
a
DDate
object (according toinstanceof
)The internal
Date
object will be copied to the new object from the given one. Changing one will not affect the other. -
a
Date
object (according toinstanceof
)The internal
Date
object will be set to the given one. Changing one will affect the other. -
a
number
or astring
(according totypeof
)The internal
Date
object will be constructed by passing the given value tonew Date()
-
undefined
(according totypeof
)The internal
Date
object will be initialised with no argument, making it represent the current date at the moment of construction
Accepts one to three arguments. Simple invocation takes the arguments year, month, day
(in order); as an alternative, you can pass a single object in the first place with year
, month
, and day
properties. Any values that aren't truthy (including entirely omitted ones) will be set automatically: day
and month
to 1
, and year
to the current year. You can pass the month name as a string (case-insensitive, and aftermath
is equivalent to the aftermath
) or as a number where 1
is Chaos. If any of the given values cannot be recognised or are out of range, null
will be returned. Otherwise, a new DDate
object will be returned, representing the given Erisian date.
If you have a regular Date
that you want to use, you should either pass it to the new DDate(...)
constructor, or (if you don't want to use the same object) you can pass dateObject.getTime()
instead to clone it.
A magic (getter/setter) property to interact with the internal (Gregorian) representation. The constructor is internally implemented by passing whatever value it's given directly to this.thuddite
's setter, so any values listed in the constructor section above are valid and will set the internal Gregorian representation accordingly. The getter guarantees that an internal representation exists on access, and returns the actual object - using Date
's mutator methods on it will affect the DDate
object.
If you want a copy of the internal Date
object, consider calling .clone()
first, or use any of the common methods of cloning a Date
object.
A magic (getter-only) property to get a generic object describing this Erisian date. Probably not that commonly needed, mostly used internally by the .format()
method, but the returned object is described below.
Please note that this IS cached since v1.2.0. The cache is generated at the last possible moment, and validity is checked by ensuring that it was calculated against a Date
object representing the same time as the current one, regardless of whether the objects themselves are the same. This means that changing the object to one representing the same time will not make it recalculate (as there is no need), but changing values on the current object will - unless they're changed back before the next cache check.
Part of the 1.2.0 Caching Update. This magic getter checks the cache validity (does it exist, and was it generated against a Date
object representing the same time as the current one) and will automatically clear the cache if the validity check fails - anything using this (see below) will wipe the cache if the thuddite date object points to a different time, even if you don't calculate new values at that time.
This is also a magic setter, because I could. When setting this value, the old cache is cleared immediately, regardless of the value being "set" at the time. Then, after that, the cache will be forcibly generated if the value being "set" is truthy. That means that setting obj.cached
to a falsey value sensibly uncaches, and setting it to a truthy one forcibly caches, regardless of whether anything has changed.
Part of the 1.2.0 Caching Update. This method runs the cache validity check (see .cached
above) and (re)calculates all values if the check fails. If the existing cache is valid, nothing else is done. Additionally, this method returns the DDate
object it's run on, allowing you to chain it if desired.
Part of the 1.2.0 Caching Update. This method unconditionally clears the cache. The next cache check will fail, the next conditional calculation will run. Unconditional calculations will, as the name implies, always run. This method also returns the DDate
object it's run on, allowing chaining - for instance, effectively unconditional cache generation by way of .uncache().cache()
.
Returns a string representation of this Erisian date, according to the given formatString
. If no formatString
is provided, the default defined in your user configuration file is used instead - see the Configuration File section below.
Calls .format()
with no formatString
. Provided for convenience when you like the default (or have customised things yourself) enough to not care about setting one yourself.
Returns a new DDate
object, initialised to the same date as the original but with a separate internal Date
object. Changing one will not affect the other.
When reading the .fnord
property of any DDate
object, the Erisian date is calculated from the internal representation and an object describing it is returned. As of the 1.2.0 Caching Update, these values are actually calculated only if they need to be (see .cached
above) to save on processing. The following properties are guaranteed to exist.
.year
- the Erisian year.month
- the numeric Erisian month, where1
is Chaos.day
- the numeric day of the Erisian month.monthName
- the name of the Erisian month, in Title Case (The Aftermath does include theThe
in the front).shortMonthName
- the name of the Erisian month, in Title Case (The Aftermath does not include theThe
in the front, nothing else is changed).monthNameAbbrev
- the abbreviated name of the Erisian Month (ex,Chaos
->Chs
).dayName
- the name of the Erisian day of the week, in Title Case (Prickle-Prickle includes the-
and both of the letterP
are capitalised).dayNameAbbrev
- the abbreviation of the Erisian day of the week (ex,Sweetmorn
->SM
).dayOfWeek
- the numeric day of the week, where1
is Sweetmorn.holyDay
- the name of the current Holy Day (see theholydays
setting in the Configuration File section for details) if one was found for today, or booleanfalse
if it is not a Holy Day.tibs
- a boolean indicating whether it is St. Tib's Day; if.tibs == true
, then:.day == 59.5
.dayName == "St. Tib's Day"
.dayNameAbbrev == "St Tib"
.dayOfWeek == 0
(St. Tib's Day is not a real day).holyDay == false
Date formatting uses the (mostly sanely) applicable specifiers from date(1):
%A
- full name of weekday (includesSt. Tib's Day
)%a
- abbreviated name of weekday (includes St. Tib's Day asSt Tib
)%B
- full name of month (it is not currently possible to get The Aftermath without the leadingThe
- if you know a good format specifier for that, let me know)%b
- abbreviated name of month%C
- century%d
- day of month (always [1, 73])%D
- identical to%m/%d/%y
%e
- identical to%_d
%F
- identical to%Y-%m-%d
%h
- identical to%b
%j
- day of year (always [1, 365] - St. Tib's Day is not a real day for this purpose)%m
- month, numeric and one-indexed (always [1, 5] - 1 is Chaos)%M
- month, numeric and zero-indexed (always [0, 4] - 0 is Chaos)%n
- newline%t
- tab%u
- day of week, numeric and one-indexed (always [1, 5] - 1 is Sweetmorn)%W
- day of week, numeric and zero-indexed (always [0, 4] - 0 is Sweetmorn)%y
- last two digits of the year%Y
- full year (equivalent to%C%y
for four-digit years and shorter; if this is still being used after the year 9999, I will not offer support for this on account of being dead for several millenia by that point)
Additionally, the following new specifiers have been added:
%H
- the name of the current Holy Day, if there is one; if not, it will not be touched (St. Tib's Day, not being a real day, does not count)%[<text>%]
- only renders the contents if it is a Holy Day%(<text>%)
- the opposite of%[%]
, only renders the contents if it is not a Holy Day%{<text>%}
- only renders the contents if it is NOT St. Tib's Day, otherwise it will be replaced withSt. Tib's Day
The following extra specifiers may be used between the %
character and the format code:
-
will not pad the field_
will pad with spaces, not zeros0
will pad with zeros (the default)^
will use uppercase#
will use lowercase The first three apply only to numbers, the last two apply only to strings. You can only use one.
The file itself is wherever the conf module puts it on your system. If you haven't customised your XDG folders, that should be in ~/.config/@princessrtfm/ddate-nodejs/config.json
. Until I can put together a configurifier utility, you'll have to change things by hand. You can delete the file to regenerate the original config, in case Something Bad happens.
format
: the default output format for the Erisian date, if none is provided (also applies to library calls not using a format, so don't do that)- The default value is
%{%A, %d %B%}%[ (%H)%], %Y Year of Our Lady Discord
, to produce output likeSetting Orange, 05 Chaos (Mungday), 3185 Year of Our Lady Discord
- The default value is
holydays
: a mapping of wholly days that you observe, or that you despise, or that you want your friends to see until they figure out how to remove this utility, or for any other reason- The value of
holydays.<month>.#<day>
will be displayed on<day>
of<month>
in conversions, assuming the pattern contains the appropriate specifier. The<month>
is the name of the month, in Title Case, and includes all relevant spaces. The<day>
is the number of the day of the month, and the#
is required. - You can delete the entire
holydays
section to get back the defaults, in case something breaks. This will not regenerate the other sections and values. - By default, only the standard holy days will be included. If you want to add your own wholly days, you'll need to do that yourself.
- The value of
localeFormatOptions
: the options to be passed totoLocaleDateString()
in non-short output mode for displaying the thuddite date that is being fixed- By default, it will output the longest locale-formatted string possible. If you want to change that, make sure the values are valid according to the MDN docs for
toLocaleDateString()
. - The
locale
argument is alwaysundefined
, to use the current system locale. Everything else is written in English because that's all I speak. If you're using a non-English locale, I hope you consider this is a pleasantly chaotic surprise.
- By default, it will output the longest locale-formatted string possible. If you want to change that, make sure the values are valid according to the MDN docs for
cli
: values that apply only the the CLI invocation, not to any library callscli.shortOutput
: iftrue
, acts as though the--short
flag was given, unless the--long
flag actually is given, in which case this is ignored