multiple bme680 in diferents rooms? about balena-sense HOT 2 OPEN

You'll need to change the I2C address of one of the bme680s if you attach more than one to the same Pi. If you are using the Adafruit version, "By default, the i2c address is 0x77. If you add a jumper from SDO to GND, the address will change to 0x76."
A better way to have multiple sensors in different rooms might be to use the Simple Sensor project with balenaSense as described in our blog article here: https://www.balena.io/blog/balenasense-v2-updated-temperature-pressure-and-humidity-monitoring-for-raspberry-pi/#aggregate-your-data-from-multiple-devices-and-sensors

from balena-sense.

You'll need to change the I2C address of one of the bme680s if you attach more than one to the same Pi. If you are using the Adafruit version, "By default, the i2c address is 0x77. If you add a jumper from SDO to GND, the address will change to 0x76." A better way to have multiple sensors in different rooms might be to use the Simple Sensor project with balenaSense as described in our blog article here: https://www.balena.io/blog/balenasense-v2-updated-temperature-pressure-and-humidity-monitoring-for-raspberry-pi/#aggregate-your-data-from-multiple-devices-and-sensors

1. Hi Alan, how can I add a container running Home Assistant to this container? I'd like to integrate this project:
   https://github.com/abdulisik/balena-homeassistant-adguard

2. Also, is there a plan to integrate bidirectional communication (sensing + actuation) in Balena Sense?

from balena-sense.