Comments (4)
Are you sure? Stratux does indeed only use the ARP cache to determine where to send GDL90. And unfortunately, this cache is only filled once the respective device makes first contact. However, it doesn't matter in what way that contact happens. Ping, web interface access, ... Once any contact is made to the Stratux, it will deliver gdl90 to it.
However, web or ssh access is completely unrelated to that and should always work. If it doesn't, something on a lower level is wrong. The Pi's wifi firmware is unfortunately kinda buggy wrt. this mode, so the feature never really left experimental stage..
However, it did work somewhat fine for me when disabling wifi channel hopping on my home network. Accessing the stratux from other devices on the network worked without issues.
Edit: can you experiment with the internet passthrough toggle? That's the only thing I could imagine having an effect in that way.
Edit2: oh wait.. did you try to access the stratux via its AP IP? Or via the one that was assigned by your DHCP server? Only the latter will work correctly of course.
from stratux.
I'm doing my best to remember when I last made a change to those settings. I dont normally use the client mode much, I just hit the problem and decided to dig into it today.
I will try internet passthrough.
I was trying to access via LAN IP. I ALSO was connected via AP by connecting to the stratux wifi SSID. It was by ssh-ing to 192.168.10.1 that I was able to get in and ping LAN clients.
I realize its probably in the firmware somewhere, just happened on the 'fix' and figured I would post it, especially since I remembered reading about it on the reddit comments.
from stratux.
FWIW, I just tried it again, but can not reproduce the problem.
I did notice though, that only one wifi client seems to be able to connect to the Stratux-AP. Not sure why that is.. probably due to the mentioned firmware issues or something. Let me know if you find anything useful.
from stratux.
I dunno. It doesnt make any sense to me. Giving up for now.
It happens every time I reboot. Today, when I ping from a linux box (3 different RPi's) the ping does not get an answer, but it is received by the stratux (arp table shows). Tried two different android and Win11, no dice.
I enabled internet passthru and rebooted. It changed all the settings (including OGN, etc) back to default. I set everything back up again and rebooted, cant ping.
I added a line to the root crontab yesterday to run a ping to the gateway at startup, so that may be what makes that work (I'm just a bit too lazy to do everything to take it out)
Cant for the life of me figure out the issue but just wanted to add it to the bugginess of the wifi.
Reminder, this is an RPI 4, if that matters (certainly the chipset is a little different). Its the only model 4 I have, Only other thing I have available is an RPI 2b being used for Flightaware feeds.
Edit: Oh, and I am running the VirusPilot fork, but dont really see anything in there deviating that far.
from stratux.
Related Issues (20)
- error while installing stratux fresh. HOT 4
- GDL39 HOT 2
- no OGN receiption HOT 6
- no FLARM traffic on ForeFlight HOT 4
- Feature Request - ICARUS protocol HOT 6
- Support of BMP390 pressure sensor HOT 7
- dump1090 not using dev branch
- uAvionix Ping USB support HOT 2
- Unable to find documentation for AHRS Report (4c:45:01) message HOT 1
- configuring serial ( /dev/ttyAMA0 ) gps device HOT 5
- Customizing raspberry to output audio
- Run SoftRf on the raspi as a stratux child process (feature proposal) HOT 4
- Serial interfaces not recognized
- Feature Add: Set ADSB Antenna Gain HOT 1
- Add u-blox M7 Power mode setting UBX_CFG_PMS HOT 4
- Support for OGN-Tracker on T-BEAM with AXP2101 PMC HOT 2
- Change OGN Tracker settings not possible HOT 20
- Major problem with T-Motion and GDL90 HOT 3
- No USB devices recognized on Rasberry Pi 3B HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from stratux.