nvs_flash_init() panics about amazon-freertos HOT 1 CLOSED

@taherrera : The nvs library is part of the esp-idf distribution from Espressif.

Perhaps your question could be better handled by Espressif's support channels.

As general advice on this type of situation, you might try the following:

1. Verify that your board / module has the correct type and size of SPI NOR that is expected by esp-idf and your sdkconfig (modules are available in a variety of flash sizes, so the default partition layout may not be suitable for your project).
2. Check that your nvs flash area is not mapped to a portion of the flash used for code storage (by inspecting the linker and map files).
3. Try a lower SPI flash speed (esp_flash_speed_s)
4. Disable other portions of the software to determine if memory corruption could be the cause of the issue.

Feel free to reopen this issue if you believe this problem to be specific to amazon-freertos. Otherwise, you might find help in the FreeRTOS Community Forums.

from amazon-freertos.