No Level With Rotation (Yaw) with Pitch Tilted Down about brushless-gimbal HOT 6 OPEN

I have the same problem!

Just adding another video to show the issue more clearly...

http://youtu.be/SVVKvRStf-4

Hope you guys can fix this soon, as I need to shoot starting the second week in 
June.

Thanks

Have the same problem, gimbal would tilt somewhat every so often. This is with 
the same setup (RCTimer) as you. Today I dismantled the RCTimer gimbal itself, 
keeping the controller and motors and built a new simpler model. Using 049 
Alpha R45 and will report back on the tilt issue.

exactly the same problem for me too.If I Unplug pitch control it works fine but 
obviously no control over pitch then plug pitch control back in and the problem 
is back

Hello,

This might not be of any help as its a old thread and I am using the GLB Gimbal 
but I had the same problem, turned out that I needed to do a 6 point 
calibration, a normal level calibration wasnt enough to correct it.

Same problems here. Anybody found a solution in the meanwhile?