Pinout not consistent across M3 builds about kbikeble HOT 3 OPEN

Thanks for noting this! The original test bike is from 2012.

Did you tap into the Keiser cable, or are you using a standard RJ9 handset cable? If a Keiser cable, are you able to see the colors from left to right in the RJ9 plug?

For now, I updated the HOWTO with a recommendation to check the colors as described at the end of the document.

In any event, it's so nice to see this working for other people!

from kbikeble.

I ordered a 4p4c RJ9 connector and cable from digikey. It has the exact same color coding as the cable on the bike. To use the system, I disconnect the original cable from the jack by the flywheel and plug my cable in there. Black Red Green Yellow, left to right looking at the connector with the tab facing me is the orientation.

from kbikeble.

Thanks.

This picture of the pickup assembly shows Black-Red-Green-Yellow as well, and following the traces on the photo of the back indicates Pot_high - Pot_wiper - Crank_sw - Common.

According to the parts listings at Sportsmith, the parts are different but unfortunately the photos are all of the same part.

I can further update the HOWTO. Thanks again!

from kbikeble.