abtom87 Goto Github PK

acorn-kernel

Micro operating system for AVR microprocessors written 100% in assembler

c_resources

crc_dma_demo_nucleol476

Example to calculate CRC-16 from an array of Bytes of length X using DMA module

csapp2e

digitalclock-spi_gpstime_stm32f4

STM32F411 reads time from GPS Module and displays it over a 7Segment Display interfaced via SPI

distance-measurement-

Distance measurement using HC-SR04 and ATMEGA328p

distance_and_timedisplay_freertos_stm32f411

This is a project where multitaksing is demonstrated with FreeRTOS and STM32F411 Evalboard

freertos_spi_serial_gps

A FreeRTOS project where there are three tasks, time is extracted from GPS Module and displayed over a 7Segment LED display.

gps-tracking-stm32f4

GPS Tracking Device using SMS - GPS Module connected to STM32F4 Eval Board - LCD Display interfaced via I2C bus

i2c-eeprom-example

Example program where ATMEGA328p as master sends bytes to EEPROM chip and reads it back

isfri

A kernel module that spawns a char device which tells the user whether it's Friday

lkmpg

The Linux Kernel Module Programming Guide (updated for 5.0+ kernels)

mpu_nucleol476

Testing MPU for Nucleo 476 based on ARM Cortex. After a memory exception occurs, the MCU is reset from the interrupt handler.

running-tx315-and-rx315-with-avr

In this example,there are two Arduino boards, one acting as a Transmitter and the other receiver. A switch is connected to Transmitter ATMEGA328p, and depending on the switch state (pressed or not), Application software transmits a payload to an address (Receiver antenna). If the address and data is okay, an LED is turned on.

spi-eeprom-avr

A simple project that uses the SPI interface of the ATMEGA328p to write and read data from EEPROM

stm32_gtest_c_code

This is a sample project for testing C code for STM32 microcontrollers using the Google Test Framework.

stm32f411-control-ws2812

stm32f4_freertos_demo

A simple project consisting of two tasks running with FreeRTOS scheduler.

temp_repo

timer2_stm32f4demo

wirelesssensornetwork-soil-moisturemonitoringsystem

This project consists of two parts, one part is the endpoint/node which measures and processes sensor data and sends it to the cordinator node which sends data to LCD indicating the stataus of available moisture in the soil.