Comments (20)
aaronwmorris
commented on June 8, 2024
With the new label location options, you just need to make sure there is enough space on the image to write the extra text. The extra text is appended at the end of the normal label, so if that is at the bottom of the image, it might be written outside of the image.
Make sure to check the log to make sure there are no errors regarding reading the file.
from indi-allsky.
sifank
commented on June 8, 2024
All of the images in the log file says" adding extra text file", no errors
or warnings. I did find a couple of images last night that had the extra
text in them, but more than 98% do not. So it fits. I didn't modify the
formatting, so it should come out in the upper left under "Stacking", which
those that worked, did, and it fit ok.
Is there something else I could check?
Sifan
Carpe Nocturnum ...
…On Fri, Sep 8, 2023 at 6:44 AM Aaron W Morris ***@***.***> wrote:
With the new label location options, you just need to make sure there is
enough space on the image to write the extra text. The extra text is
appended at the end of the normal label, so if that is at the bottom of the
image, it might be written outside of the image.
Make sure to check the log to make sure there are no errors regarding
reading the file.
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZNJVWCWLBXGCUV5Q5LXZMOKDANCNFSM6AAAAAA4P7XB2Y>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
Is the extra text file being dynamically generated? If so, is it possible that while it is being written, there is a lot of lag between opening the file for writing and data being flushed to disk?
from indi-allsky.
sifank
commented on June 8, 2024
It was dynamically generated. So I created a 4 line static file. It is
still not working, although the log file says "#3428: Adding extra text
from /opt/KOBS/allskyscripts/allsky2.txt" contents are;
DpDep: 2.8 F
Temp: 60.3 F
Hum: 89.9 %
DP: 57.5 F
Permissions are 644
The bottom of the Label Template is:
# xy:15,15 (Upper Left)
# color:0,150,0
Exposure {exposure:0.6f}
# color:150,50,0
Gain {gain:d}
# color:50,50,150
Temp {temp:0.1f}{temp_unit:s}
# color:150,0,150
Stretch {stretch:s}
Stacking {stack_method:s}
# color:200,200,200 (default color)
# additional labels will be added here
Is there any special formatting required?
Sifan
Carpe Nocturnum ...
…On Fri, Sep 8, 2023 at 5:29 PM Aaron W Morris ***@***.***> wrote:
Is the extra text file being dynamically generated? If so, is it possible
that while it is being written, there is a lot of lag between opening the
file for writing and data being flushed to disk?
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZNGAXLPS5I7S5XJY7DXZOZ73ANCNFSM6AAAAAA4P7XB2Y>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
sifank
commented on June 8, 2024
This might be related: every 3rd or 4th image has this dark band across
the top (see image attached).
This is also the same when using the static file mentioned in my previous
email.
Sifan
Carpe Nocturnum ...
…On Sat, Sep 9, 2023 at 9:56 PM Sifan Kahale ***@***.***> wrote:
It was dynamically generated. So I created a 4 line static file. It is
still not working, although the log file says "#3428: Adding extra text
from /opt/KOBS/allskyscripts/allsky2.txt" contents are;
DpDep: 2.8 F
Temp: 60.3 F
Hum: 89.9 %
DP: 57.5 F
Permissions are 644
The bottom of the Label Template is:
# xy:15,15 (Upper Left)
# color:0,150,0
Exposure {exposure:0.6f}
# color:150,50,0
Gain {gain:d}
# color:50,50,150
Temp {temp:0.1f}{temp_unit:s}
# color:150,0,150
Stretch {stretch:s}
Stacking {stack_method:s}
# color:200,200,200 (default color)
# additional labels will be added here
Is there any special formatting required?
Sifan
Carpe Nocturnum ...
On Fri, Sep 8, 2023 at 5:29 PM Aaron W Morris ***@***.***>
wrote:
> Is the extra text file being dynamically generated? If so, is it possible
> that while it is being written, there is a lot of lag between opening the
> file for writing and data being flushed to disk?
>
> —
> Reply to this email directly, view it on GitHub
> <#934 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AJVGOZNGAXLPS5I7S5XJY7DXZOZ73ANCNFSM6AAAAAA4P7XB2Y>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
I found the problem. I had an incorrect variable name that my linter did not catch. Merged #941 to fix.
from indi-allsky.
sifank
commented on June 8, 2024
Again, thanks for all you do and your responsiveness - much appreciated!
Sifan
Carpe Nocturnum ...
…On Sun, Sep 10, 2023 at 4:37 AM Aaron W Morris ***@***.***> wrote:
I found the problem. I had an incorrect variable name that my linter did not catch. Merged #941 to fix.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
I never saw the attached image with the dark band. I do not think it was added to the issue via email.
from indi-allsky.
sifank
commented on June 8, 2024
Sorry, image attached via github now.
from indi-allsky.
aaronwmorris
commented on June 8, 2024
That is very strange. I do not know what would cause that. I would have guessed a bad dark frame, but it looks like you have not taken dark frames yet.
from indi-allsky.
sifank
commented on June 8, 2024
The dark band has not come back yet since I upgraded to 941!
I have two units, I upgraded both, and no dark band on either so far. It's
looking good!
Sifan
Carpe Nocturnum ...
…On Sun, Sep 10, 2023 at 11:53 AM Aaron W Morris ***@***.***> wrote:
That is very strange. I do not know what would cause that. I would have
guessed a bad dark frame, but it looks like you have not taken dark frames
yet.
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZJ3G6P7NYMIQQBI473XZYECDANCNFSM6AAAAAA4P7XB2Y>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
sifank
commented on June 8, 2024
Well, now that dark band is back, same as before. Should I write a new
issue on that?
Sifan
Carpe Nocturnum ...
…On Sun, Sep 10, 2023 at 3:15 PM Sifan Kahale ***@***.***> wrote:
The dark band has not come back yet since I upgraded to 941!
I have two units, I upgraded both, and no dark band on either so far.
It's looking good!
Sifan
Carpe Nocturnum ...
On Sun, Sep 10, 2023 at 11:53 AM Aaron W Morris ***@***.***>
wrote:
> That is very strange. I do not know what would cause that. I would have
> guessed a bad dark frame, but it looks like you have not taken dark frames
> yet.
>
> —
> Reply to this email directly, view it on GitHub
> <#934 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AJVGOZJ3G6P7NYMIQQBI473XZYECDANCNFSM6AAAAAA4P7XB2Y>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
I doubt I would be able to do much about that. What kind of camera are you using? I will try to research it.
from indi-allsky.
sifank
commented on June 8, 2024
I'm using the ASI120MC. The dark band is occurring about every other frame
now. It's been like this for the last couple of days. When I first
downloaded and updated to 941, it seemed to not do it, until perhaps a day
or so later. I have two RPI 4's setup as allskycams, both using the ASI120
and both did the same thing.
Sifan
Carpe Nocturnum ...
…On Tue, Sep 12, 2023 at 6:18 AM Aaron W Morris ***@***.***> wrote:
I doubt I would be able to do much about that. What kind of camera are you
using? I will try to research it.
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZM542CCUFXO5MFNK5TX2BOLXANCNFSM6AAAAAA4P7XB2Y>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
sifank
commented on June 8, 2024
A bit more info: I played the 4 hr loop from this morning and the dark
band was there during the night, but at 6:09am this morning all the images
were clear.
Sifan
Carpe Nocturnum ...
On Wed, Sep 13, 2023 at 10:51 PM Sifan Kahale ***@***.***>
wrote:
… I'm using the ASI120MC. The dark band is occurring about every other
frame now. It's been like this for the last couple of days. When I first
downloaded and updated to 941, it seemed to not do it, until perhaps a day
or so later. I have two RPI 4's setup as allskycams, both using the ASI120
and both did the same thing.
Sifan
Carpe Nocturnum ...
On Tue, Sep 12, 2023 at 6:18 AM Aaron W Morris ***@***.***>
wrote:
> I doubt I would be able to do much about that. What kind of camera are
> you using? I will try to research it.
>
> —
> Reply to this email directly, view it on GitHub
> <#934 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AJVGOZM542CCUFXO5MFNK5TX2BOLXANCNFSM6AAAAAA4P7XB2Y>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
Is the dark band still a problem for you?
from indi-allsky.
sifank
commented on June 8, 2024
Hi Aaron, thanks for asking!
I have two setups, both RPI 4s and both using the ASI120mc-s. Both are at
Pull Release 941. Checking the time lapse for last night, one still had
the dark band across the top, maybe 4 or 5 times over the entire night -
not very much. The other one didn't have any ... Now other times, they
both have had it.
I will update to PR 1010 (latest I see on github) and let 'em run and let
you know in two days (nights) what I find.
Sifan
Carpe Nocturnum ...
…On Tue, Oct 31, 2023 at 3:46 PM Aaron W Morris ***@***.***> wrote:
Is the dark band still a problem for you?
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZKVOYR6PB3QHNH6ZADYCF5U5AVCNFSM6AAAAAA4P7XB22VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGEZTONJXGA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
aaronwmorris
commented on June 8, 2024
These suggestions are going to be generic, but I can only think of two possible solutions. If we already discussed these, I apologize. :-)
- Replace your USB cable
- Replace your power supply
USB cables are the most common problem people have with these systems.
from indi-allsky.
sifank
commented on June 8, 2024
Hi Aaron, I've updated both of my allskycams to the latest pr and ran them
all night collecting the timelapses. So far no dark bars. I'll continue
to run them for a few more nights and let you know.
Both these units run on POE, so plenty of power for the RPI 4's (4gb).
Both USB cables are short (<6"), but one cable is older than the other. If
one of these shows dark bands, I'll note which cable and change it and
continue testing.
Thanks!!
Sifan
Carpe Nocturnum ...
…On Tue, Oct 31, 2023 at 7:44 PM Aaron W Morris ***@***.***> wrote:
These suggestions are going to be generic, but I can only think of two
possible solutions. If we already discussed these, I apologize. :-)
- Replace your USB cable
- Replace your power supply
—
Reply to this email directly, view it on GitHub
<#934 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJVGOZK4Z4VO2KTN6Z55CNDYCGZSFAVCNFSM6AAAAAA4P7XB22VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGMYTKOBQHA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from indi-allsky.
sifank
commented on June 8, 2024
Ok, here's what I found - both allskycams are doing the same thing:
This is for last night 11/02/2023 at sunset:
Cam1: 17:59 1st dark band (it's getting darker outside)
18:34 last dark band
18:35 very bright image as I believe it is switching over to
night mode
18:36 cam adjusted, no more dark bands
Cam2: 17:51 1st dark bands appear (this is inside the house so darker
earlier)
18:34 last dark band
18:35 very bright image - cam adjusting
18:36 cam adjusted, no more dark bands
This did not happen in the mornings, just at night and just before the
camera 'bloomed' and adjusted back. The only time the entire 24hr period
dark bands occurred was just before switchover to night mode.
Hope this helps.
Sifan
Carpe Nocturnum ...
…On Thu, Nov 2, 2023 at 12:15 PM Sifan Kahale ***@***.***> wrote:
Hi Aaron, I've updated both of my allskycams to the latest pr and ran them
all night collecting the timelapses. So far no dark bars. I'll continue
to run them for a few more nights and let you know.
Both these units run on POE, so plenty of power for the RPI 4's (4gb).
Both USB cables are short (<6"), but one cable is older than the other. If
one of these shows dark bands, I'll note which cable and change it and
continue testing.
Thanks!!
Sifan
Carpe Nocturnum ...
On Tue, Oct 31, 2023 at 7:44 PM Aaron W Morris ***@***.***>
wrote:
> These suggestions are going to be generic, but I can only think of two
> possible solutions. If we already discussed these, I apologize. :-)
>
> - Replace your USB cable
> - Replace your power supply
>
> —
> Reply to this email directly, view it on GitHub
> <#934 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AJVGOZK4Z4VO2KTN6Z55CNDYCGZSFAVCNFSM6AAAAAA4P7XB22VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGMYTKOBQHA>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
from indi-allsky.
Related Issues (20)
- Frame is dark even though gain and exposure look ok HOT 5
- QHY5III485C Focus Mode HOT 13
- External temperature script HOT 10
- 64 bit Bookworm and HQ camera fails HOT 16
- Unable to initialise Remote Web Interface likely due to 'No Camera in DB' and CCD device INDI Webcam HOT 5
- Remote camera not working: Cannot identify /dev/video0: 2, No such file or directory HOT 8
- Need help with two instances HOT 30
- timeouts after upgrade to latest HOT 2
- Oracle Cloud Infrastructure (OCI) Support HOT 8
- syncapi timelapse video transfers failing but images OK even with 900s timeouts HOT 17
- No image capture in 7.8 HOT 23
- Restarting pi services HOT 9
- Error during install of indi while upgrading indi-allsky HOT 4
- Daytime exposure used during night HOT 8
- Error: While importing 'app', an ImportError was raised: HOT 11
- Upgrade fails HOT 22
- Installation fails on fresh SD card Pi4 HOT 10
- Unable to start services HOT 3
- Stopped working at midnight HOT 6
- Moon Mode - unable to reactivate, duplication in config? HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from indi-allsky.