Jump Bridge Data Files about imp HOT 6 OPEN

I think you'll need to remove the ".txt" from the filename.

from imp.

I just tryed to set up the Jump bridge i get "Retrieved Bridge file." But it dont show up on map even after i tryed to restart the program

from imp.

I tried a lot of things, the file is lower case region name (no .txt behind it or anything), it is in a path without spaces (no headaches there), the file is plaintext made in notepad. I did quotes, no quotes, /, \ with or without file:// and nothing works.

Nothing i tried allows me to have the jumpbridge file locally. I don't have a webspace to test this with.

I cannot figure out how to get IMP to read a local file with bridges (besides it was a pain to find the format of the file to begin with, apparently the jumpbridge file in docs does not exist in 0.9.7.6). What do i need to do to have a local file as jumpbridge file?

To be clear, i don't get the message "Retrieved bridge file" at all, i get "Failed getting bridges, attempting to use the last good file"

from imp.

Having the same issue. I do not get any message about bridge file, and nothing shows up.

from imp.

ok, I tried several things and found this to work:

file:///D:/jbdata

IMP will add the closing slash, so don't type it.
In that directory I have a system name text file, NO EXTENSION, just a plain text file.

from imp.

Thanks, the "file:///d:/jbdata" helped. I didn't do the file:/// and didn't use / in my windows paths

from imp.